| 制造商 | 部件名 | 数据表 | 功能描述 |

STMicroelectronics
|
STB55NF03L-1 |
338Kb/11P |
N-CHANNEL 30V - 0.01 W - 55A TO-220/D2PAK/I2PAK STripFET II POWER MOSFET March 2002 |
| STD2NK70Z |
305Kb/12P |
N-CHANNEL 700 V - 6 W - 1.6 A DPAK/IPAK Zener-Protected SuperMESHTM MOSFET |
| STEVAL-IPM10B |
1Mb/9P |
1200 W motor control power board based on STGIB10CH60TS-L SLLIMM??2nd series IPM Rev 4 - September 2019 |
| TDA7850LV |
201Kb/8P |
4 x 50 W quad bridge amplifier suitable for low voltage car radio systems October 2010 |
| AN2928 |
225Kb/21P |
Modified buck converter for LED applications |
| AN4291 |
2Mb/53P |
STEVAL385LED4CH: four independent high brightness LED |
| STLA02PUR |
732Kb/23P |
White LED driver for display backlight February 2011 Rev 1 |
| HVLED002 |
481Kb/19P |
High performance current mode LED controller |
| STEVAL-ILL089V1 |
902Kb/4P |
1 A buck LED driver board based on the ALED6000 automotive-grade dimmable LED driver Rev 1 - November 2019 |
| STEVAL-ILL061V1 |
159Kb/7P |
High brightness 4x4 RGB LED matrix October 2013 Rev 1 |
| STEVAL-ILL015V1 |
116Kb/5P |
High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32 |
| UM1561 |
972Kb/39P |
This document describes how the firmware to manage the 250 W micro-inverter demo October 2012 Rev 1 |
| STAC9200 |
449Kb/14P |
200 W, 32 V HF to 1.3 GHz LDMOS transistor in a STAC package |
| TS2012EI |
553Kb/32P |
Filter-free Flip Chip stereo 2 x 2.5 W class D audio power amplifier April 2014 Rev 1 |
| ST25R3914 |
172Kb/3P |
Automotive high performance HF reader / NFC initiator with 1 W output power supporting AAT June 2019 |
| STEVAL-ISA080V1 |
88Kb/4P |
90 W HB LLC resonant converter demonstration board based on the L6585DE combo IC |
| STEVAL-ISA147V3 |
394Kb/10P |
500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller March 2016 Rev 1 |
| STEVAL-ISA149V1 |
250Kb/4P |
19 V, 75 W Energy Star-compliant SMPS using the L6563S and the L6566A June 2016 Rev 2 |
| STEVAL-ISA184V1 |
221Kb/4P |
5 V-12 V, 15 W double output isolated flyback converter based on VIPer37LD December 2016 Rev 1 |
| AN2835 |
796Kb/21P |
This application note describes the electronic lamp ballast for 70 W high intensity discharge |