| 制造商 | 部件名 | 数据表 | 功能描述 |

STMicroelectronics
|
LIS2DU12 |
1Mb/13P |
MEMS digital output motion sensor: advanced ultra-low-power 3-axis accelerometer June 2021 Rev 1 |
| LIS2DW |
1Mb/63P |
MEMS digital output motion sensor: high-performance, ultra-low-power 3-axis April 2020 Rev 2 |
| STGAP2GS |
551Kb/20P |
Galvanically isolated 3 A single gate driver for Enhancement mode GaN FETs Rev 1 - December 2022 |
| L6756 |
48Kb/3P |
2/3/4 phase buck controller for VR10, VR11.1 and AM2 processor applications |
| 74LCX138 |
309Kb/17P |
Low voltage CMOS 3 to 8 line decoder (Inverter) with 5V tolerant inputs |
| 74LVQ373 |
289Kb/13P |
LOW VOLTAGE CMOS OCTAL D-TYPE LATCH WITH 3 STATE OUTPUTS NON INVERTING |
| 74LVQ573 |
288Kb/13P |
LOW VOLTAGE CMOS OCTAL D-TYPE LATCH WITH 3 STATE OUTPUTS NON INVERTING |
| STEVAL-ISA050V1 |
158Kb/4P |
Monolithic VR for chipset and DDR2/3 demonstration board based on the PM6641 |
| ST3222 |
159Kb/9P |
3 TO 3.6V, LOW POWER, UP TO 400KBPS, RS-232 DRIVERS AND RECEIVERS |
| EVAL5987 |
285Kb/6P |
3 A step-down switching regulator demonstration board based on the L5987, L5987A November 2009 Rev 1 |
| AIS2IH |
1Mb/63P |
MEMS digital output motion sensor: high-performance 3-axis accelerometer for automobile applications Rev 4 - January 2021 |
| M54HC563 |
273Kb/13P |
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT HC563 INVERTING - HC573 NON INVERTING |
| M54HCT373 |
269Kb/13P |
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT HCT373 NON INVERTING - HCT533 INVERTING |
| ST3243E |
300Kb/18P |
짹15KV ESD PROTECTED 3 TO 5.5V, 400KBPS, RS-232 TRANSCEIVER WITH AUTO-POWERDOWN |
| ST3241E |
261Kb/17P |
짹15kV ESD Protected 3 to 5.5V, 400kbps, RS-232 transceiver with auto-powerdown |
| 74LVX240 |
258Kb/12P |
LOW VOLTAGE CMOS OCTAL BUS BUFFER (3-STATE INV.) WITH 5V TOLERANT INPUTS |
| M54HC574 |
301Kb/11P |
RAD-HARD OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING |
| L6756D |
650Kb/36P |
2/3/4 phase buck controller for VR10, VR11 and VR11.1 processor applications |
| AN2847 |
407Kb/31P |
This document provides application information for the low-voltage 3-axis digital output |
| M54HCT563 |
269Kb/13P |
OCTAL D-TYPE LATCH WITH 3 STATE OUTPUT HCT563 INVERTING - HCT573 NON INVERTING |