FX2 Relay Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. Features • Telecom/signal relay (dry circuit, test access, ringing) • Slim line 15 x 7.3 mm, 0.590 x 0.287 inch • Switching current 2 A • 2 changeover contacts (2 form C / DPDT) • Bifurcated contacts • High sensitivity results in low nominal power consumption 80 mW for high sensitive, 140 mW for sensitive version • High dielectric characteristic ≤ 1800 Vrms also between open contact • High surge capability (1.2 / 50 µs and 10 / 700 µs) meets Telcordia GR 1089 and FCC Part 68 ≤ 2500 V between open contacts ≤ 3500 V between coil and contacts • High mechanical shock up to 300 G functional up to 1500 G survival • Hermetically sealed (RT V) Typical applications • Communications equipment linecard application - analog, ISDN, xDSL, PABX Voice over IP • Office and business equipment • Measurement and control equipment • Consumer electronics Set top boxes, HiFi • Medical equipment
|