DESCRIPTION
The DS2760 High-Precision Li+ Battery Monitor is a data acquisition, information storage, and safety protection device tailored for cost-sensitive battery pack applications. This low-power device integrates precise temperature, voltage, and current measurement, nonvolatile data storage, and Li+ protection into the small footprint of either a TSSOP package or flip chip. The DS2760 is a key component in applications including remaining capacity estimation, safety monitoring, and battery-specific data storage.

FEATURES
■ Li+ safety circuit
    - Overvoltage protection
    - Overcurrent/short circuit protection
    - Undervoltage protection
■ Zero Volt Battery Recovery Charge
■ Available in two configurations:
    - Internal 25mΩ sense resistor
    - External user-selectable sense resistor
■ Current measurement
    - 12-bit bidirectional measurement
    - Internal sense resistor configuration: 0.625mA LSB and ±1.9A dynamic range
    - External sense resistor configuration: 15.625V LSB and ±64mV dynamic range
■ Current accumulation
    - Internal sense resistor: 0.25mAhr LSB
    - External sense resistor: 6.25Vhr LSB
■ Voltage measurement with 4.88mV resolution
■ Temperature measurement using integrated sensor with 0.125°C resolution
■ System power management and control feature support
■ 32 bytes of lockable EEPROM
■ 16 bytes of general purpose SRAM
■ Dallas 1-Wire® interface with unique 64-bit device address
■ Low power consumption:
    - Active current: 90 μA max
    - Sleep current: 2 μA max