 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
AM6548BACDXEAF 数据表(PDF) 132 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
AM6548BACDXEAF 数据表(HTML) 132 Page - Texas Instruments |
|
|
132 / 284 page  7.6 Electrical Characteristics Note The interfaces or signals described in Section 7.6.1 through Section 7.6.5.1 correspond to the interfaces or signals available in multiplexing mode 0 (Primary Function). All interfaces or signals multiplexed on the balls described in these tables have the same DC electrical characteristics, unless multiplexing involves a PHY and GPIO combination, in which case different DC electrical characteristics are specified for the different multiplexing modes (Functions). 7.6.1 I2C OPEN DRAIN DC Electrical Characteristics over recommended operating conditions (unless otherwise noted) PARAMETER MIN TYP MAX UNIT BALL NAMES in Mode 0: WKUP_I2C0_SCL / WKUP_I2C0_SDA / MCU_I2C0_SCL / MCU_I2C0_SDA BALL NUMBERS: AC7 /AD6 / AD7 / AD8 I2C STANDARD MODE / FAST MODE - VDDSHV0_WKUP = 1.8 V VIH High-level input threshold 0.7 × VDDSHV0_WKUP V VIL Low-level input threshold 0.3 × VDDSHV0_WKUP V VIHSS Input high-level Steady State(1) 0.70 × VDDSHV0_WKUP V VILSS Input low-level Steady State(2) 0.30 × VDDSHV0_WKUP V VHYS Hysteresis 0.1 × VDDSHV0_WKUP V IIN Input leakage current. This value represents the maximum current flowing in or out of the pin while the output driver is disabled and the input is swept from VSS to VDD. 12 µA IOZ Total leakage current through the driver/receiver combination, which may include an internal pull-up or pull- down. This value represents the maximum current flowing in or out of the pin while the output driver is disabled, the pull-up or pull-down is inhibited, and the input is swept from VSS to VDD. 12 µA VOL Low-level output voltage at 3-mA sink current 0.2 × VDDSHV0_WKUP V I2C STANDARD MODE / FAST MODE - VDDSHV0_WKUP = 3.3 V VIH High-level input voltage 0.7 × VDDSHV0_WKUP V VIL Low-level input voltage 0.3 × VDDSHV0_WKUP V VIHSS Input high-level Steady State(1) 0.70 × VDDSHV0_WKUP V VILSS Input low-level Steady State(2) 0.21 × VDDSHV0_WKUP V VHYS Hysteresis 0.05 × VDDSHV0_WKUP V IIN Input leakage current. This value represents the maximum current flowing in or out of the pin while the output driver is disabled and the input is swept from VSS to VDD. 80 µA AM6548, AM6528, AM6546, AM6526 SPRSP52B – DECEMBER 2019 – REVISED JUNE 2021 www.ti.com 132 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated Product Folder Links: AM6548 AM6528 AM6546 AM6526 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
