 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
TSL208R 数据表(PDF) 4 Page - TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS |
|
||||||||||||||||||||||||||||||
TSL208R 数据表(HTML) 4 Page - TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS |
|
|
4 / 10 page  TSL208R 512 y 1 LINEAR SENSOR ARRAY TAOS031E − MAY 2007 4 r r Copyright E 2007, TAOS Inc. The LUMENOLOGY r Company www.taosinc.com Electrical Characteristics at fclock = 1 MHz, VDD = 5 V, TA = 25°C, λp = 640 nm, tint = 5 ms, RL = 330 Ω, Ee = 18 μW/cm2 (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Vout Analog output voltage (white, average over 512 pixels) See Note 1 1.6 2 2.4 V Vdrk Analog output voltage (dark, average over 512 pixels) 0 50 150 mV PRNU Pixel response nonuniformity See Notes 2 & 3 ± 7% ± 20% Nonlinearity of analog output voltage See Note 3 ± 0.4% FS Output noise voltage See Note 4 1 mVrms Re Responsivity 16 22 28 V/ (μJ/cm2) SE Saturation exposure See Note 5 155 nJ/cm2 Vsat Analog output saturation voltage 2.5 3.4 V DSNU Dark signal nonuniformity All pixels See Note 6 25 120 mV IL Image lag See Note 7 0.5% IDD Supply current, output idle 28 45 mA IIH High-level input current VI = VDD 10 μA IIL Low-level input current VI = 0 10 μA VO High level output voltage SO IO = 50 μA 4.5 4.95 V VOH High-level output voltage, SO IO = 4 mA 4.6 V VO Low level output voltage SO IO = 50 μA 0.01 0.1 V VOL Low-level output voltage, SO IO = 4 mA 0.4 V Ci(SI) Input capacitance, SI 40 pF Ci(CLK) Input capacitance, CLK 40 pF NOTES: 1. The array is uniformly illuminated with a diffused LED source having a peak wavelength of 640 nm. 2. PRNU is the maximum difference between the voltage from any single pixel and the average output voltage from all pixels of the device under test when the array is uniformly illuminated at the white irradiance level. PRNU includes DSNU. 3. Nonlinearity is defined as the maximum deviation from a best-fit straight line over the dark-to-white irradiance levels, as a percent of analog output voltage (white). 4. RMS noise is the standard deviation of a single-pixel output under constant illumination as observed over a 5-second period. 5. Minimum saturation exposure is calculated using the minimum Vsat, the maximum Vdrk, and the maximum Re. 6. DSNU is the difference between the maximum and minimum output voltage in the absence of illumination. 7. Image lag is a residual signal left in a pixel from a previous exposure. It is defined as a percent of white-level signal remaining after a pixel is exposed to a white condition followed by a dark condition: IL + Vout (IL) * Vdrk Vout (white) * Vdrk 100 Timing Requirements (see Figure 1 and Figure 2) MIN NOM MAX UNIT tsu(SI) Setup time, serial input (see Note 8) 20 ns th(SI) Hold time, serial input (see Note 8 and Note 9) 0 ns tw Pulse duration, clock high or low 50 ns tr, tf Input transition (rise and fall) time 0 500 ns NOTES: 8. Input pulses have the following characteristics: tr = 6 ns, tf = 6 ns. 9. SI must go low before the rising edge of the next clock pulse. |
类似零件编号 - TSL208R |
|
类似说明 - TSL208R |
|
|
|
链接网址 |
| 隐私政策 |
| ALLDATASHEETCN.COM |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
