E5DC-RX2ASM-000 datasheet(110/112 Pages) OMRON

110 / 112 page

@C/E5@C-T

110

● Precautions when Wiring

• Separate input leads and power lines in order to prevent external

noise.

• Use a shielded, AWG24 to AWG18 (cross-sectional area of 0.205

to 0.8231 mm2) twisted-pair cable. Use a shielded, AWG24 to

AWG14 (cross-sectional area of 0.205 to 2.081 mm2) twisted-pair

cable for the E5CC-U. The stripping length is 6 to 8 mm for the

E5CC, E5EC, E5AC, E5DC, or E5CC-T and 5 to 6 mm for the

E5CC-U.

The E5GC stripping length is 6 to 8 mm for models with screw

terminal blocks and 8 to 12 mm for models with screwless clamp

terminal blocks.

• Use crimp terminals when wiring the terminals.

• Use the suitable wiring material and crimp tools for crimp terminals.

• Tighten the terminal screws to a torque of 0.43 to 0.58 N·m.

The specified torque is 0.5 N·m for the E5CC-U.

• For the E5GC, E5CC, E5EC, E5AC, E5DC, or E5@C-T, use the

following types of crimp terminals for M3 screws.

• For the E5CC-U, use the following types of crimp terminals for

M3.5 screws.

• For E5GC Controllers with screwless clamp terminal blocks, use

braided or solid wires with a gauge of AWG24 to AWG18 (equal to

a cross-sectional area of 0.205 to 0.823 mm2).

The length of the conductive portion inserted into the terminal must

be 8 to 12 mm. Ferrules must be 0.8 to 1.4 mm in diameter..

• Recommended Ferrules for E5GC Screwless Clamp Terminals

Three-year Guarantee

● Period of Guarantee

The guarantee period of the Unit is three years starting from the date

the Unit is shipped from the factory.

Scope of Guarantee

The Unit is guaranteed under the

following operating conditions.

1. Average Operating Temperature

(see note):

−10°C to 50°C

2. Mounting Method: Standard mounting

Note: Average Operating Temperature

Refer to the process temperature

of the Unit mounted to a control

panel and connected to peripheral

devices on condition that the Unit

is in stable operation, sensor input

type K is selected for the Unit, the

positive and negative thermocouple input terminals of the Unit

are short-circuited, and the ambient temperature is stable.

Should the Unit malfunction during the guarantee period, OMRON

shall repair the Unit or replace any parts of the Unit at the expense of

OMRON.

5.8 mm max.

7.2 mm max.

Manufacturer

Model number

Altech Corp.

2623.0

Daido Solderless Terminal Mfg. Co.

AVA-0.5

J.S.T. Mfg. Co.

TUB-0.5

Nichifu Co.

Single (1 wire)

TGNTC-1.25-9T

TGVTC-1.25-11T

TGNTC-1.25-11T

TC0.3-9.5

TC1.25-11S-ST

TC1.25-11S

TC2-11S

Double (2 wires)

TGWVTC-1.25-9T

TGWVTC-1.25-11T

0.8 to 1.4 mm

8 to 12 mm

Ferrules

wires

Top

Bottom

E5DC-RX2ASM-000 数据表(PDF) 110 Page - Omron Electronics LLC

E5DC-RX2ASM-000 数据表(HTML) 110 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载