E5DC-RX2DBM-000 datasheet(133/138 Pages) OMRON

133 / 138 page

@C/E5@C-T

133

3. Recommended Wire Size and Ferrules

Wire Size

Use the wire sizes and stripping lengths given in the following table.

Ferrules

Ferrules must be 0.8 to 1.4 mm in diameter.

The exposed conductor inserted into the terminal must be 8 to 12 mm

in length.

Recommended ferrules

@C-B (Controllers with Push-In Plus Terminal

Blocks)

1. Connecting Wires to the Push-In Plus Terminal Block

Part Names of the Terminal Block

Connecting Wires with Ferrules and Solid Wires

Insert the solid wire or ferrule straight into the terminal block until the

end touches the terminal block.

If a wire is difficult to connect because it is too thin, use a flat-blade

screwdriver in the same way as when connecting stranded wire.

Connecting Stranded Wires

Use the following procedure to connect the wires to the terminal block.

1. Hold a flat-blade screwdriver at an angle and insert it into the

release hole. The angle should be between 10° and 15°.

If the flat-blade screwdriver is inserted correctly, you will feel the

spring in the release hole.

2. With the flat-blade screwdriver still inserted into the release hole,

insert the wire into the terminal hole until it strikes the terminal

block.

3. Remove the flat-blade screwdriver from the release hole.

Checking Connections

• After the insertion, pull gently on the wire to make sure that it will

not come off and the wire is securely fastened to the terminal block.

• To prevent short circuits, insert stripped part of a stranded or solid

wire or the conductor part of a ferrule until it is hidden inside the

terminal insertion hole. (See the following diagram.)

Wire Size

Stripping length

AWG24 to AWG18

(0.21 to 0.82 mm2)

8 to 12 mm

Manufacturer name

Model number

Altech Corp.

2623.0

Daido Solderless Terminal Mfg. Co.

AVA-0.5

J.S.T. Mfg. Co.

TUB-0.5

Nichifu Co., Ltd.

Single (1 wire)

TGNTC-1.25-9T

TGVTC-1.25-11T

TGNTC-1.25-11T

TC0.3-9.5

TC1.25-11S-ST

TC1.25-11S

TC2-11S

Double (2 wires)

TGWVTC-1.25-9T

TGWVTC-1.25-11T

0.8 to 1.4mm

8 to 12mm

Release hole

Terminal

(Insertion) hole

E5CC-B/EC-B

E5DC-B

Release hole

Terminal

(Insertion) hole

Ferrules and

Solid Wires

E5CC-B/EC-B

If a wire is difficult to

connect because it is

too thin, use a

flat-blade screwdriver

in the same way as

when connecting

stranded wire.

E5DC-B

Ferrules and

Solid Wires

Flat-blade screwdriver

10 to 15°

(1)

(2)

(3)

E5CC-B/EC-B

∗

Side view

of the product

30°

∗ Side view of the product

E5DC-B

(1)

(2)

(3)

Flat-blade

screwdriver

10 to 15°

E5DC-RX2DBM-000 数据表(PDF) 133 Page - Omron Electronics LLC

E5DC-RX2DBM-000 数据表(HTML) 133 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

E5DC-RX2DBM-000 数据表(PDF) 133 Page - Omron Electronics LLC

E5DC-RX2DBM-000 数据表(HTML) 133 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载