| 数据搜索系统,热门电子元器件搜索 |
|
M38047F9HKP 数据表(PDF) 330 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M38047F9HKP 数据表(HTML) 330 Page - Renesas Technology Corp |
|
330 / 387 page ![]() 3-40 REJ09B0212-0100Z Rev.1.00 Jan 14, 2005 3804 Group (Spec.H) APPENDIX 3.3 Notes on use 3.3.18 Notes on wait mode sClock restoration If the wait mode is released by a reset when XCIN is set as the system clock and XIN oscillation is stopped during execution of the WIT instruction, XCIN oscillation stops, XIN oscillations starts, and XIN is set as the system clock. In the above case, the RESET pin should be held at “L” until the oscillation is stabilized. 3.3.19 Notes on CPU rewrite mode (1) Operation speed During CPU rewrite mode, set the system clock φ 4.0 MHz or less using the main clock division ratio selection bits (bits 6 and 7 of address 003B16). (2) Instructions inhibited against use The instructions which refer to the internal data of the flash memory cannot be used during the CPU rewrite mode. (3) Interrupts inhibited against use The interrupts cannot be used during the CPU rewrite mode because they refer to the internal data of the flash memory. (4) Watchdog timer In case of the watchdog timer has been running already, the internal reset generated by watchdog timer underflow does not happen, because of watchdog timer is always clearing during program or erase operation. (5) Reset Reset is always valid. In case of CNVSS = “H” when reset is released, boot mode is active. So the program starts from the address contained in address FFFC16 and FFFD16 in boot ROM area. 3.3.20 Notes on programming (1) Processor status register ➀ Initializing of processor status register Flags which affect program execution must be initialized after a reset. In particular, it is essential to initialize the T and D flags because they have an important effect on calculations. q Reason After a reset, the contents of the processor status register (PS) are undefined except for the I flag which is “1”. Fig. 3.3.5 Initialization of processor status register Reset ↓ Initializing of flags ↓ Main program |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |