 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ATtiny88 数据表(PDF) 135 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATtiny88 数据表(HTML) 135 Page - ATMEL Corporation |
|
|
135 / 266 page  135 8008C–AVR–03/09 ATtiny48/88 15.7 Transmission Modes The TWI can operate in one of four major modes. These are named Master Transmitter (MT), Master Receiver (MR), Slave Transmitter (ST) and Slave Receiver (SR). Several of these modes can be used in the same application. As an example, the TWI can use MT mode to write data into a TWI EEPROM, MR mode to read the data back from the EEPROM. If other masters are present in the system, some of these might transmit data to the TWI, and then SR mode would be used. It is the application software that decides which modes are legal. 3 in r16,TWSR andi r16, 0xF8 cpi r16, START brne ERROR if ((TWSR & 0xF8) != START) ERROR(); Check value of TWI Status Register. Mask prescaler bits. If status different from START go to ERROR ldi r16, SLA_W out TWDR, r16 ldi r16, (1<<TWINT) | (1<<TWEN) out TWCR, r16 TWDR = SLA_W; TWCR = (1<<TWINT) | (1<<TWEN); Load SLA_W into TWDR Register. Clear TWINT bit in TWCR to start transmission of address 4 wait2: in r16,TWCR sbrs r16,TWINT rjmp wait2 while (!(TWCR & (1<<TWINT))) ; Wait for TWINT Flag set. This indicates that the SLA+W has been transmitted, and ACK/NACK has been received. 5 in r16,TWSR andi r16, 0xF8 cpi r16, MT_SLA_ACK brne ERROR if ((TWSR & 0xF8) != MT_SLA_ACK) ERROR(); Check value of TWI Status Register. Mask prescaler bits. If status different from MT_SLA_ACK go to ERROR ldi r16, DATA out TWDR, r16 ldi r16, (1<<TWINT) | (1<<TWEN) out TWCR, r16 TWDR = DATA; TWCR = (1<<TWINT) | (1<<TWEN); Load DATA into TWDR Register. Clear TWINT bit in TWCR to start transmission of data 6 wait3: in r16,TWCR sbrs r16,TWINT rjmp wait3 while (!(TWCR & (1<<TWINT))) ; Wait for TWINT Flag set. This indicates that the DATA has been transmitted, and ACK/NACK has been received. 7 in r16,TWSR andi r16, 0xF8 cpi r16, MT_DATA_ACK brne ERROR if ((TWSR & 0xF8) != MT_DATA_ACK) ERROR(); Check value of TWI Status Register. Mask prescaler bits. If status different from MT_DATA_ACK go to ERROR ldi r16, (1<<TWINT)|(1<<TWEN)| (1<<TWSTO) out TWCR, r16 TWCR = (1<<TWINT)|(1<<TWEN)| (1<<TWSTO); Transmit STOP condition Assembly Code Example C Example Comments |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
