PSMN5R0-30YL_3

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2010. All rights reserved.

Product data sheet

Rev. 03 — 4 January 2010

12 of 14

NXP Semiconductors

PSMN5R0-30YL

N-channel TrenchMOS logic level FET

9.

Legal information

9.1

Data sheet status

[1]

Please consult the most recently issued document before initiating or completing a design.

[2]

The term 'short data sheet' is explained in section "Definitions".

[3]

The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product

9.2

Definitions

Draft— The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences of

use of such information.

Short data sheet— A short data sheet is an extract from a full data sheet with

the same product type number(s) and title. A short data sheet is intended for

quick reference only and should not be relied upon to contain detailed and full

information. For detailed and full information see the relevant full data sheet,

which is available on request via the local NXP Semiconductors sales office.

In case of any inconsistency or conflict with the short data sheet, the full data

sheet shall prevail.

Product specification— The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

NXP Semiconductors and its customer, unless NXP Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the NXP Semiconductors product is

deemed to offer functions and qualities beyond those described in the

Product data sheet.

9.3

Disclaimers

Limited warranty and liability— Information in this document is believed to

be accurate and reliable. However, NXP Semiconductors does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information.

In no event shall NXP Semiconductors be liable for any indirect, incidental,

punitive, special or consequential damages (including - without limitation - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards

customer for the products described herein shall be limited in accordance

with theTerms and conditions of commercial saleof NXP Semiconductors.

Right to make changes— NXP Semiconductors reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

Suitability for use— NXP Semiconductors products are not designed,

authorized or warranted to be suitable for use in medical, military, aircraft,

space or life support equipment, nor in applications where failure or

malfunction of an NXP Semiconductors product can reasonably be expected

to result in personal injury, death or severe property or environmental

damage. NXP Semiconductors accepts no liability for inclusion and/or use of

NXP Semiconductors products in such equipment or applications and

therefore such inclusion and/or use is at the customer’s own risk.

Applications— Applications that are described herein for any of these

products are for illustrative purposes only. NXP Semiconductors makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

NXP Semiconductors does not accept any liability related to any default,

damage, costs or problem which is based on a weakness or default in the

customer application/use or the application/use of customer’s third party

customer(s) (hereinafter both referred to as “Application”). It is customer’s

sole responsibility to check whether the NXP Semiconductors product is

suitable and fit for the Application planned. Customer has to do all necessary

testing for the Application in order to avoid a default of the Application and the

product. NXP Semiconductors does not accept any liability in this respect.

Quick reference data— The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

Limiting values— Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale— NXP Semiconductors

products are sold subject to the general terms and conditions of commercial

agreed in a valid written individual agreement. In case an individual

agreement is concluded only the terms and conditions of the respective

agreement shall apply. NXP Semiconductors hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of NXP Semiconductors products by customer.

No offer to sell or license— Nothing in this document may be interpreted or

construed as an offer to sell products that is open for acceptance or the grant,

conveyance or implication of any license under any copyrights, patents or

other industrial or intellectual property rights.

Document status[1][2]

Product status[3]

Definition

Objective [short] data sheet

Development

This document contains data from the objective specification for product development.

Preliminary [short] data sheet

Qualification

This document contains data from the preliminary specification.

Product [short] data sheet

Production

This document contains the product specification.