DAMM15SD datasheet(146/301 Pages) ITT

146 / 301 page

Dimensions are shown in mm (inch)

Dimensions subject to change

145

D Subminiature

Military/High Reliability

Test Data

MIL-C-24308 Test Extracts Applicable To Class G Connectors

Test Description

Test Requirements

MIL-STD-1344

Test Method

Mating/Unmating Force

Shell Size

Layout

Max Unmating (lbs.)

Max Mating (lbs.)

2013

Contact Retention

Contacts shall be retained in their inserts by a 9 pound (minimum) force. The axial displacement of contacts shall not exceed .012 inch while under load.

2007

Insulation Resistance

After humidity 1 Megohm (min.)

All other conditions 5000 Megohm (min.)

3003

Contact Resistance

After salt spray not to exceed 65 millivolts max.

3004

Size 20 AWG; 7.5 A

Vibration

No damage and no loosening of parts due to vibration. No interruption of electrical continuity longer than 1 microsecond.

2005

Test Cond. 4

Shock

No damage and no loosening of parts. No interruption of electrical continuity longer than 1 microsecond.

2004

Test Cond. E

Durability

No electrical or mechanical defects after 500 cycles of mating and unmating.

2016

200

± 100 cycles/hour

Salt Spray (Corrosion)

No exposure of base metal due to corrosion which will affect performance. Product will meet further tests as specified.

1001

Cond. B

Fluid Immersion

20 hours immersion MIL-H-5606 Hydraulic Fluid.

20 hours immersion MIL-L-23699 Lubricating Fluid.

Connectors shall meet mating/unmating force following immersion.

1016

DAMM15SD 数据表(PDF) 146 Page - ITT Industries

DAMM15SD 数据表(HTML) 146 Page - ITT Industries

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载