STM32F427AI datasheet(151/239 Pages) STMICROELECTRONICS

151 / 239 page

DocID024030 Rev 9

151/238

STM32F427xx STM32F429xx

Electrical characteristics

197

Figure 45. USB OTG full speed timings: definition of data signal rise and fall time

USB high speed (HS) characteristics

Unless otherwise specified, the parameters given in Table 70 for ULPI are derived from

tests performed under the ambient temperature, fHCLK frequency summarized in Table 69

and VDD supply voltage conditions summarized in Table 68, with the following configuration:

•

Output speed is set to OSPEEDRy[1:0] = 10, unless otherwise specified

•

Capacitive load C = 30 pF, unless otherwise specified

•

Measurement points are done at CMOS levels: 0.5VDD.

Refer to Section 6.3.17: I/O port characteristics for more details on the input/output

characteristics.

Table 67.

USB OTG full speed electrical characteristics(1)

1. Guaranteed by design.

Driver characteristics

Symbol

Parameter

Conditions

Min

Max

Unit

Rise time(2)

2. Measured from 10% to 90% of the data signal. For more detailed informations, please refer to USB

Specification - Chapter 7 (version 2.0).

CL = 50 pF

420

Fall time(2)

CL = 50 pF

trfm

Rise/ fall time matching

tr/tf

110

VCRS

Output signal crossover voltage

1.3

2.0

ZDRV

Output driver impedance(3)

3. No external termination series resistors are required on DP (D+) and DM (D-) pins since the matching

impedance is included in the embedded driver.

Driving high or

low

Table 68. USB HS DC electrical characteristics

Symbol

Parameter

Min.(1)

1. All the voltages are measured from the local ground potential.

Max.(1)

Unit

Input level

VDD

USB OTG HS operating voltage

1.7

3.6

STM32F427AI 数据表(PDF) 151 Page - STMicroelectronics

STM32F427AI 数据表(HTML) 151 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载