The part number **2007250-1** refers to a specific electronic connector manufactured by **TE Connectivity**. This component is a high-speed data connector primarily used in telecommunications and data networking. --- ### Technical Specifications Overview | Attribute | Specification | | :--- | :--- | | **Manufacturer** | TE Connectivity | | **Product Line** | SFP+ (Small Form-factor Pluggable Plus) | | **Component Type** | Connector Cage & Connector Assembly | | **Configuration** | 1x1 Port (Single Port) | | **Mounting Type** | Through Hole - Press-Fit | | **Termination Type** | Press-Fit (No soldering required for PCB) | | **Data Rate** | Up to 16 Gbps (Standard SFP+ Speeds) | --- ### Key Features * **Integrated Design:** This part is a "Stacked" or "Combo" style assembly where the cage (mechanical housing) and the electrical connector (20-pin interface) are integrated into a single unit. * **EMI Shielding:** The metal cage is designed to minimize Electromagnetic Interference (EMI) to ensure signal integrity at high frequencies. * **Press-Fit Technology:** It uses "eye-of-the-needle" compliant pins, allowing it to be pressed into the PCB without the need for manual soldering, which reduces thermal stress on the board. * **Heat Dissipation:** The cage often includes openings or structural supports for heat sinks to manage the thermal load of the transceiver modules. --- ### Common Applications 1. **Networking Hardware:** Switches, routers, and hubs. 2. **Storage Equipment:** Fiber Channel host bus adapters (HBAs) and storage arrays. 3. **Telecommunications:** Base stations and central office equipment. 4. **Servers:** High-speed Network Interface Cards (NICs). --- ### Physical Dimensions While specific dimensions should be verified via the [official TE Connectivity datasheet](https://www.te.com), the standard footprint for a 1x1 SFP+ cage is approximately: * **Width:** ~14.5 mm * **Height:** ~9.5 mm (above PCB) * **Depth:** ~48.7 mm