AI

The **2MS-2-R** refers to a specific series of **sub-miniature sealed toggle switches**, commonly manufactured by brands like **Dailywell** or **Taiway**. These switches are designed for telecommunications, instrumentation, and medical equipment where space is limited and protection against environmental factors (like dust or moisture) is required.
---
## 1. Component Specifications
The "2MS" series follows a standardized nomenclature. Here is the technical breakdown of the 2MS-2-R:
| Feature | Specification |
| :--- | :--- |
| **Switch Type** | Toggle Switch (Sub-miniature) |
| **Circuitry** | SPDT (Single Pole Double Throw) |
| **Switch Function** | ON-NONE-ON |
| **Contact Rating** | 3A @ 120VAC or 28VDC; 1.5A @ 250VAC |
| **Electrical Life** | 30,000 make-and-break cycles at full load |
| **Contact Resistance** | 20 mΩ max. initial @ 2-4VDC |
| **Insulation Resistance** | 1,000 MΩ min. |
| **Operating Temperature** | -30°C to 85°C |
---
## 2. Key Features
* **Sealed Construction:** The "R" in the suffix often denotes **RoHS Compliance**, but in the context of the series design, these switches feature an internal O-ring seal on the bushing and epoxy terminal seals. This prevents contamination during soldering and cleaning.
* **Compact Footprint:** Designed for PCB mounting or small panel cutouts where standard toggle switches would be too bulky.
* **Actuator Options:** Usually features a standard brass, chrome-plated toggle lever.
---
## 3. Terminal and Mounting Styles
Depending on the specific sub-variant, the 2MS-2 series supports various mounting styles:
1. **Solder Lug:** For manual wiring.
2. **PC Thru-Hole:** For direct mounting on a Printed Circuit Board.
3. **Right Angle / Vertical Right Angle:** For edge-mounting on boards.
---
## 4. Materials Composition
```markdown
- Case & Bushing: Glass filled nylon 6/6, flame retardant, heat stabilized (UL94V-0).
- Actuator: Brass, chrome plated with internal O-ring seal.
- Switch Support: Brass, tin plated.
- Contacts/Terminals: Silver or Gold plated copper alloy.
```
---
- ⤷
What is the difference between SPDT and DPDT in the 2MS series?
- ⤷ Can this switch be used in IP67 rated environments?
- ⤷ What are the common mounting hole dimensions for the 2MS-2-R?