88C60L-AF5-R
AI

The **88C60L-AF5-R** is a specific electronic component, primarily known as a **Voltage Detector** or **Reset IC**. It is manufactured by UTC (Unisonic Technologies Co., Ltd). These devices are essential for monitoring power supply levels and ensuring that microprocessors or digital systems do not operate under unstable voltage conditions.
---
### 1. Key Technical Specifications
The part number follows a specific nomenclature that defines its electrical characteristics:
| Parameter | Specification |
| :--- | :--- |
| **Function** | Voltage Detector / Reset IC |
| **Threshold Voltage** | 6.0V (indicated by '60') |
| **Output Configuration** | Open Drain (indicated by 'L') |
| **Package Type** | SOT-25 / SOT-23-5 (indicated by 'AF5') |
| **Packing** | Tape & Reel (indicated by 'R') |
| **Accuracy** | ±2% |
---
### 2. Pin Configuration (SOT-25)
Typically, the pinout for the AF5 package is as follows:
1. **Vout**: Reset Output (active low).
2. **Vdd**: Supply Voltage / Input Voltage to sense.
3. **Vss**: Ground.
4. **NC/CD**: No connection or External Delay Capacitor (depending on specific sub-series).
5. **NC**: No connection.
---
### 3. Functional Description
The device monitors the voltage supplied to the $V_{DD}$ pin.
* **Normal Operation:** When the supply voltage is above the threshold ($V_{DET}$), the output remains high (pulled up externally).
* **Reset State:** When the supply voltage drops below the 6.0V threshold, the $V_{OUT}$ pin goes low.
* **Hysteresis:** To prevent "chattering" or oscillation when the voltage is right at the threshold, the device includes a small amount of hysteresis (usually 5% of $V_{DET}$).
---
### 4. Circuit Implementation Example
Because the "L" version is **Open Drain**, it requires an external pull-up resistor to function correctly.
```c
Vdd (Power Source) ----+-----------+
| |
[Pull-up R] [88C60L]
| |
MCU Reset Pin <--------+------- Vout (Pin 1)
```
---
### 5. Common Applications
* Microprocessor reset circuitry.
* Battery life monitors.
* Level discriminators.
* Protection against "Brown-out" conditions.
- ⤷
What is the difference between Open Drain and CMOS output for this IC?
- ⤷ How do I calculate the required pull-up resistor value for the 88C60L?
- ⤷ Can this IC be used to monitor a 12V rail if the threshold is only 6V?