数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

  • BD46292

  • AI
    The **BD46292G** is a high-accuracy, low-power voltage detector IC developed by **ROHM Semiconductor**. It belongs to the BD46xxx series and is primarily used for monitoring power supply rails and providing a reset signal to microcontrollers when the voltage falls below a specific threshold. --- ### 1. Key Technical Specifications | Parameter | Specification | | :--- | :--- | | **Detection Voltage** | 2.9V (Fixed) | | **Output Type** | CMOS (Push-Pull) | | **Operating Voltage Range** | 0.95V to 10.0V | | **Current Consumption** | 0.8 μA (Typical) | | **Detection Accuracy** | ±1.0% | | **Package Type** | SSOP5 (Small Surface Mount) | | **Temperature Range** | -40°C to +105°C | --- ### 2. Functional Description The device monitors the **$V_{DD}$** pin. Its behavior is defined by the following states: * **Normal Condition:** When the input voltage is above 2.9V, the output pin stays **High**. * **Reset Condition:** If the voltage drops below the threshold (2.9V), the output switches to **Low**. * **Hysteresis:** To prevent "chattering" (rapid switching near the threshold), the IC incorporates a small hysteresis voltage (typically 5% of the detection voltage). ### 3. Pin Configuration (SSOP5) | Pin No. | Pin Name | Function | | :---: | :--- | :--- | | 1 | **VOUT** | Output Pin (Reset Signal) | | 2 | **VDD** | Power Supply / Detection Voltage Input | | 3 | **GND** | Ground | | 4 | **N.C.** | No Connection | | 5 | **CT** | Capacitor connection for Delay Time setting | --- ### 4. Circuit Implementation The BD46292G includes a built-in delay circuit. By connecting an external capacitor to the **CT** pin, you can adjust the "Release Delay Time" (the time the reset signal stays active after the voltage has recovered). ```c // Example: Calculating Delay Time (tPLH) tPLH ≈ 10^6 × C_CT (Farads) // If C_CT = 0.01μF, the delay is approximately 10ms. ``` --- ### 5. Common Applications * **Microcontrollers:** Providing a Power-On Reset (POR) to ensure the CPU starts correctly. * **Battery-Powered Devices:** Monitoring battery levels to prevent deep discharge. * **Industrial Equipment:** Ensuring stable operation of digital logic circuits during power fluctuations. ---
    ✨ Follow-up Questions
    • ⤷ What is the difference between CMOS and Open-Drain output types in voltage detectors?
    • ⤷ How do I calculate the exact capacitor value for a 50ms reset delay?
    • ⤷ Can the BD46292G be used to monitor a 5V rail?