CF252018-R33
AI

The **CF252018-R33** is a surface-mount (SMD) wire-wound chip inductor. This component is commonly used in high-frequency circuits for signal filtering and impedance matching.
Below is a detailed breakdown of its specifications and characteristics.
---
### 1. Part Number Breakdown
The part number follows a standard naming convention for passive components:
| Component Code | Dimensions (Metric/Imperial) | Inductance Value | Tolerance |
| :--- | :--- | :--- | :--- |
| **CF** | Manufacturer Series (Chip Fixed) | **252018** (2.5 x 2.0 x 1.8 mm) | **R33** (0.33 microhenries) | J (±5%) or K (±10%) |
### 2. Technical Specifications
The "R33" indicates an inductance of **0.33 µH**. Typical electrical characteristics for this specific part include:
| Parameter | Value (Typical) |
| :--- | :--- |
| **Inductance** | 0.33 µH (330 nH) |
| **Case Size** | 1008 (Imperial) / 2520 (Metric) |
| **DC Resistance (DCR)** | ~0.45 Ω to 0.80 Ω (Depends on brand) |
| **Rated Current (Idc)** | ~400 mA to 600 mA |
| **Self-Resonant Frequency (SRF)** | > 350 MHz |
| **Quality Factor (Q)** | 25 - 30 (measured at ~25 MHz) |
### 3. Key Features
* **Wire-wound Construction:** Unlike multilayer inductors, the wire-wound design offers significantly lower DC resistance and a higher Quality (Q) factor, making it more efficient for RF applications.
* **Physical Size:** The 252018 dimensions (2.5mm length, 2.0mm width, 1.8mm height) make it suitable for compact PCB designs.
* **High Reliability:** Usually encapsulated in ceramic or heat-resistant resin to withstand reflow soldering temperatures.
### 4. Common Applications
1. **RF Circuits:** Used in oscillators and high-frequency communication equipment.
2. **Filtering:** Effective at blocking high-frequency noise in power lines or signal paths.
3. **Mobile Electronics:** Found in GPS modules, Bluetooth devices, and Wi-Fi routers.
4. **Impedance Matching:** Ensuring maximum power transfer between different stages of a circuit.
---
### Equivalent Cross-Reference Example
If you are looking for replacements from other manufacturers, search for:
* **TDK:** NLV25T-R33J-PF
* **Murata:** LQW2UASR33
* **Bourns:** CM252016-R33KL
- ⤷What is the difference between a wire-wound inductor and a multilayer inductor?
- ⤷ How does the 'Q' factor affect the performance of this inductor?
- ⤷ What are the soldering precautions for 2520 size SMD components?