CSTCC2M10G53-R0
AI

## Understanding the CSTCC2M10G53-R0
The **CSTCC2M10G53-R0** is a specific type of **Ceramic Resonator** manufactured by Murata Electronics. It belongs to the CERALOCK® family, which is widely used in microcomputer peripheral circuits to provide a stable clock signal.
---
### 1. Key Technical Specifications
| Parameter | Value |
| :--- | :--- |
| **Component Type** | Ceramic Resonator |
| **Oscillation Frequency** | 2.10 MHz |
| **Frequency Tolerance** | ±0.5% |
| **Built-in Capacitance** | 15 pF |
| **Mounting Type** | Surface Mount (SMD) |
| **Operating Temperature** | -20°C to +80°C |
| **Package / Case** | 7.2mm x 3.0mm (Standard CSTCC Profile) |
---
### 2. Composition and Features
The "CSTCC" series is distinguished by its internal architecture and physical properties:
1. **Built-in Load Capacitors:** Unlike standard crystals that require external capacitors (C1 and C2) to complete the oscillation circuit, this part has them built-in. This saves PCB space and reduces the Bill of Materials (BOM) cost.
2. **Piezoelectric Ceramic:** It uses the mechanical vibration of a piezoelectric ceramic element to generate a stable frequency.
3. **High Stability:** While not as precise as a quartz crystal, it is significantly more stable and accurate than a standard RC (Resistor-Capacitor) oscillator.
---
### 3. Part Number Breakdown
Understanding the nomenclature helps identify the part's characteristics:
* **CSTCC**: Series name (SMD type with built-in capacitance).
* **2M10**: Frequency (2.10 Megahertz).
* **G**: Frequency tolerance (±0.5%).
* **53**: Load capacitance code (15pF).
* **R0**: Packaging code (usually refers to Tape & Reel).
---
### 4. Typical Application Circuit
Because the capacitors are internal, the wiring is simplified. The resonator usually has three terminals:
* **Input (Pin 1):** Connected to the MCU's XTAL_IN.
* **Ground (Pin 2):** Connected to the system ground.
* **Output (Pin 3):** Connected to the MCU's XTAL_OUT.
```cpp
// Logic Diagram
[ MCU ]
|-- (XTAL_IN) ---- [Pin 1]
| [ CSTCC ] --- [Pin 2] --- (GND)
|-- (XTAL_OUT) ---- [Pin 3]
```
---
### 5. Pros and Cons
| Advantages | Disadvantages |
| :--- | :--- |
| Small footprint (SMD) | Lower precision than Quartz Crystals |
| No external capacitors needed | Temperature sensitivity is higher than crystals |
| Fast start-up time | Limited frequency range compared to IC oscillators |
| Cost-effective for mass production | |
- ⤷What are the primary differences between this ceramic resonator and a quartz crystal?
- ⤷ In what types of consumer electronics is the 2.10 MHz frequency typically used?
- ⤷ How does the built-in capacitance affect the PCB design layout?