CTC2F-R18M
AI

The **CTC2F-R18M** is a specific electronic component belonging to the **Fixed Inductor** category, commonly used in radio frequency (RF) and signal filtering circuits. Below is a detailed breakdown of its technical specifications and characteristics.
### 1. General Specifications
The part number follows a standard naming convention for axial leaded inductors. Here is the technical breakdown:
| Parameter | Value / Specification |
| :--- | :--- |
| **Inductance** | 0.18 µH (Microhenries) |
| **Tolerance** | ±20% (indicated by 'M' suffix) |
| **Core Material** | Phenolic or Ferrite (depending on frequency range) |
| **Form Factor** | Axial Leaded (Through-hole) |
| **Current Rating** | Typically 500mA - 1000mA (varies by manufacturer) |
---
### 2. Key Characteristics
The CTC2F series is known for being a "Conformal Coated" inductor. Key electronic attributes include:
* **Self-Resonant Frequency (SRF):** Due to the low inductance value (0.18µH), this component has a very high SRF, making it suitable for high-frequency applications.
* **Q-Factor:** Designed to maintain a high Quality factor, ensuring minimal energy loss in resonant circuits.
* **DCR (DC Resistance):** It features very low internal resistance, which prevents significant voltage drops and heat generation.
* **Protection:** The "conformal coating" (usually epoxy) protects the copper winding from moisture, oxidation, and physical vibration.
---
### 3. Application Use Cases
This specific part is typically found in the following electronic environments:
1. **RF Coupling/Decoupling:** Used to block high-frequency noise while allowing DC current to pass through.
2. **Filter Networks:** Acts as a low-pass or band-pass filter component in communication equipment.
3. **Signal Processing:** Used in television sets, radios, and telecommunication devices to stabilize signals.
4. **Power Supplies:** Small-scale switching regulators use these for EMI (Electromagnetic Interference) suppression.
---
### 4. Part Number Breakdown
Understanding the nomenclature helps in identifying substitutes:
* **CTC2F:** The series identifier (usually 2.5mm to 3.5mm diameter body).
* **R18:** The inductance value. "R" acts as a decimal point ($0.18$).
* **M:** The tolerance code ($M = \pm20\%$).
---
- ⤷
What are the equivalent replacements for the CTC2F-R18M inductor?
- ⤷ How does the 'M' tolerance affect circuit performance compared to 'K' tolerance?
- ⤷ What is the typical operating temperature range for conformal coated inductors?