AI

The **E5EC-RX2ABM-800** is a high-performance digital temperature controller from Omron’s E5_C series. This specific model is designed for 48 x 96 mm panel mounting and is widely used in industrial automation for precise thermal management.
---
### 1. Key Technical Specifications
Below are the primary electronic and physical characteristics:
| Feature | Specification |
| :--- | :--- |
| **Input Type** | Multi-input (Thermocouple, PT100, Analog V/mA) |
| **Control Output** | Relay Output (SPST-NO, 250 VAC, 5A) |
| **Supply Voltage** | 100 to 240 VAC, 50/60 Hz |
| **Auxiliary Outputs** | 2 Auxiliary outputs (Relays) |
| **Display Type** | High-contrast LCD (3-tier display) |
| **Dimensions** | 48 x 96 mm (1/8 DIN) |
| **Sampling Period** | 50 ms (High-speed processing) |
---
### 2. Breakdown of the Model Number
The alphanumeric code identifies the specific electronic features of the unit:
* **E5EC**: Series name (48 x 96 mm size).
* **R**: Control Output 1 is a **Relay**.
* **X**: No Control Output 2 (Single output model).
* **2**: Features **2 Auxiliary outputs** (used for alarms or events).
* **A**: Standard model type.
* **B**: **Sensorless vector control** capability (standard for this series).
* **M**: Features a **Terminal Block** with finger protection.
* **800**: Special internal coding for specific regional or feature sets (often indicates a universal input/standard version).
---
### 3. Electronic Features & Functions
The E5EC-RX2ABM-800 is engineered with several advanced electronic capabilities:
#### A. Universal Input Processing
The device contains high-precision A/D converters that allow it to read various sensor types without hardware changes:
* **Thermocouples:** K, J, T, E, L, U, N, R, S, B, W, or PL II.
* **Platinum Resistance Thermometers:** Pt100 or JPt100.
* **Analog Inputs:** 4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to 5 V, or 0 to 10 V.
#### B. PID Control with "2-PID"
It uses a specialized Omron algorithm known as **2-PID** (two-degree-of-freedom PID). This allows the controller to optimize for both:
1. **Disturbance Response:** How quickly it corrects for outside air or load changes.
2. **Setpoint Tracking:** How quickly it reaches the target temperature without overshooting.
#### C. High-Speed Sampling
With a **50 ms sampling cycle**, the controller can react to temperature changes almost instantaneously, which is critical for processes where temperature shifts rapidly (e.g., plastic extrusion or rapid chemical reactions).
#### D. Visual Interface
The "White PV" display technology provides high visibility even in low-light factory environments. It typically shows:
* **PV (Process Value):** Current temperature.
* **SV (Set Value):** Targeted temperature.
* **MV (Maneuver Value):** Percentage of output power.
---
### 4. Wiring Diagram Overview
The rear of the unit features a terminal block for electronic connections:
1. **Terminals 1-2:** Power Supply (100-240 VAC).
2. **Terminals 3-5:** Control Output 1 (Relay output).
3. **Terminals 8-10:** Auxiliary Outputs (Alarms).
4. **Terminals 11-12:** Input sensor (Thermocouple or PT100).
---
- ⤷
How do I configure the input type for a K-type thermocouple on this model?
- ⤷ What is the difference between the Relay output and a Voltage output (SSR drive) in the E5EC series?
- ⤷ Does this model support RS-485 Modbus communication?