The **EE-1010-R** is a specific connector accessory manufactured by **Omron Automation**. It is primarily designed for use with Omron's E3Z series of photoelectric sensors and other compatible electronic sensing components. ### 1. Technical Specifications The EE-1010-R is a **connector with a cable** (often referred to as a "Cordset") that facilitates the electrical connection between a sensor and a control system (like a PLC). | Parameter | Specification | | :--- | :--- | | **Component Type** | Connector with Cable (L-shaped) | | **Number of Poles** | 4-pole | | **Cable Length** | 2 Meters (Standard) | | **Connector Shape** | L-shaped (Right Angle) | | **Wire Outer Diameter** | Approx. 4 mm | | **Material (Cable)** | Vinyl Chloride (PVC) | --- ### 2. Key Features and Design Understanding the electronic and mechanical design of this part is crucial for industrial integration: * **Right-Angle (L-shaped) Design:** The "R" in the suffix typically denotes a right-angle connector. This is electronically significant for installations in tight spaces where a straight cable would experience mechanical stress or "cable fatigue." * **Protection Rating:** Usually rated at **IP67**, meaning it provides high resistance to dust and water ingress, protecting the sensitive electrical signals from environmental interference. * **Vibration Resistance:** The connector is designed to lock securely to the sensor, preventing signal loss or intermittent connections in high-vibration machinery. --- ### 3. Wiring Configuration The EE-1010-R utilizes a standard color-coding scheme for its 4-wire internal structure to ensure proper electronic interfacing: | Wire Color | Function (Typical) | | :--- | :--- | | **Brown** | Positive Power Supply (+V / 12-24VDC) | | **Blue** | Negative Power Supply (0V / GND) | | **Black** | Control Output (Signal) | | **White** | Mode Selection (e.g., Light-ON/Dark-ON) | --- ### 4. Common Applications * **Photoelectric Sensors:** Used to power and retrieve signals from Omron E3Z sensors. * **Automation Lines:** Connecting proximity switches or limit switches to a junction box. * **Maintenance:** Used as a quick-disconnect solution to allow for rapid replacement of faulty sensors without rewiring the entire system.