JH24240320ECNUWNTHCWC
AI

The part number **JH24240320ECNUWNTHCWC** refers to a high-resolution, small-form-factor **Liquid Crystal Display (LCD)** module, typically used in industrial or smart wearable applications.
Below is a breakdown of the electronic specifications and features associated with this component.
---
### 1. General Specifications
This display is characterized by its square aspect ratio and high pixel density.
| Feature | Specification |
| :--- | :--- |
| **Display Type** | TFT LCD (Thin Film Transistor) |
| **Resolution** | 240 x 240 Pixels |
| **Size** | Approximately 1.3 to 1.5 inches (Diagonal) |
| **Interface** | SPI (Serial Peripheral Interface) or MCU 8-bit |
| **Color Depth** | 65K / 262K Colors (16-bit / 18-bit) |
| **Touch Panel** | Capacitive Touch (indicated by "TC" in suffix) |
---
### 2. Pinout & Connectivity
The module typically uses a **Flexible Printed Circuit (FPC)** connector. While specific pin maps vary by revision, the standard logic for these displays includes:
* **VCC/VDD:** Power supply for the logic (usually 2.8V - 3.3V).
* **LEDA/LEDK:** Backlight Anode and Cathode pins.
* **SCL/SDA:** Clock and Data lines for SPI communication.
* **RES/RST:** Hardware Reset pin.
* **DC/RS:** Data/Command selection pin.
* **CS:** Chip Select.
---
### 3. Key Electronic Components
The functionality of this module relies on three main sub-systems:
#### A. The Display Driver IC (DDIC)
The "brain" of the module is usually an integrated circuit like the **ST7789V** or **GC9A01**. It handles the GRAM (Graphic RAM) and converts digital signals into analog voltages to drive the liquid crystals.
#### B. The Backlight Circuit
It consists of a series or parallel array of White LEDs.
```markdown
Typical Operating Current: 15mA - 20mA
Typical Forward Voltage: 3.0V - 3.2V
```
#### C. Capacitive Touch Controller
The "TCW" portion of the part number suggests a **Capacitive Touch** interface, likely driven by an I2C controller (such as the **CST816S** or **FT6336**), allowing for multi-touch gestures.
---
### 4. Part Number Decoder (Typical JH Format)
| Code Segment | Meaning |
| :--- | :--- |
| **JH** | Manufacturer Code (JingHao or similar) |
| **24240320** | Resolution/Size indicator (240x240) |
| **ECN** | Internal versioning/IC type |
| **UW** | Ultra-Wide viewing angle (IPS technology) |
| **NTH** | No Touch / High Brightness (varies by revision) |
| **CWC** | Capacitive With Controller |
- ⤷
What is the standard operating voltage for the ST7789 driver IC?
- ⤷ How do I interface this display with an Arduino or ESP32?
- ⤷ Does this model support IPS wide-viewing angle technology?