M24C64-RMB5
AI

The **M24C64-RMB5** is a specific variant of the 64-Kbit I²C (Inter-Integrated Circuit) Serial EEPROM manufactured by **STMicroelectronics**. It is designed for low-power and low-voltage applications.
---
## 1. Technical Specifications
The following table summarizes the key electrical and physical parameters of the M24C64-RMB5:
| Parameter | Value |
| :--- | :--- |
| **Memory Size** | 64 Kbits (8192 x 8 bits) |
| **Interface** | I²C (Two-Wire Serial) |
| **Operating Voltage ($V_{CC}$)** | 1.8V to 5.5V |
| **Clock Frequency** | 400 kHz (at 1.8V), 1 MHz (at 2.5V+) |
| **Write Cycle Time** | 5 ms (Maximum) |
| **Data Retention** | 40 Years |
| **Endurance** | 4 Million Write Cycles |
| **Operating Temperature** | -40°C to +85°C |
---
## 2. Key Features
The "RMB5" suffix indicates specific attributes related to packaging and performance:
### Memory Architecture
* **Byte and Page Write:** Supports writing a single byte or a full page (32 bytes) in one cycle.
* **Random and Sequential Read:** Allows for reading data from any address or streaming data sequentially.
### Device Protection
* **Write Control (WC) Pin:** A hardware pin used to protect the entire memory from accidental write instructions.
* **Schmitt Triggers:** Integrated on inputs for noise filtering (improving signal integrity on the I²C bus).
### Package Information (UFDFPN8)
The **MB** in the part number typically refers to the **UFDFPN8** (also known as DFN8) package. This is a very thin, leadless package (2x3 mm) ideal for space-constrained mobile or wearable devices. The **5** indicates the finishing/plating or a specific manufacturing process flow.
---
## 3. Pin Configuration
The device usually comes in an 8-pin layout:
1. **E0, E1, E2:** Chip Enable inputs (allows up to 8 devices on the same I²C bus).
2. **VSS:** Ground.
3. **SDA:** Serial Data (Bi-directional).
4. **SCL:** Serial Clock.
5. **WC:** Write Control (Active High).
6. **VCC:** Supply Voltage.
---
## 4. Typical Applications
Due to its low power consumption and small footprint, the M24C64-RMB5 is commonly found in:
* **Consumer Electronics:** Smartphone camera modules, Bluetooth headsets.
* **Computing:** Configuration storage for small microcontrollers.
* **Medical:** Portable diagnostic tools.
* **Industrial:** Parameter storage for sensors.
- ⤷
What is the difference between the M24C64-R and the M24C64-W variants?
- ⤷ How do I implement the Write Control (WC) pin in a circuit to prevent data corruption?
- ⤷ Can I use this EEPROM with a 3.3V Arduino or ESP32?