M2PHS2L-164-R2
AI

The **M2PHS2L-164-R2** is a specific model of a **Mini PCIe (Peripheral Component Interconnect Express) Slot Connector**. These components are critical in computing hardware, specifically for interfacing expansion cards (like Wi-Fi, Bluetooth, or SSD modules) with a motherboard.
Below is a breakdown of its technical specifications and electronic characteristics.
---
## 1. Technical Specifications Table
| Feature | Specification |
| :--- | :--- |
| **Component Type** | Mini PCI Express (mPCIe) Card Edge Connector |
| **Pin Count** | 52 Pins |
| **Pitch (Spacing)** | 0.8 mm |
| **Orientation** | Right Angle / Surface Mount (SMT) |
| **Mounting Height** | Typically 4.0mm to 9.2mm (Model specific) |
| **Voltage Rating** | 50V AC/DC |
| **Current Rating** | 0.5A per pin |
| **Material** | High-Temperature Thermoplastic (LCP) |
---
## 2. Key Electronic Characteristics
### A. Signal Integrity
As a PCI Express-compliant part, it is designed to handle high-speed differential signals. It minimizes crosstalk and signal attenuation to support PCIe Gen 1 and Gen 2 data rates.
### B. Contact Resistance
The internal contacts are usually made of copper alloy with **Gold plating** on the contact area. This ensures:
* Low contact resistance (typically < 55mΩ).
* High durability against oxidation.
* Reliable connectivity over multiple mating cycles (insertion/extraction).
### C. Mechanical Stability
The "R2" suffix often denotes a revision or a specific packaging/latching mechanism. These connectors usually feature:
* **Hold-downs:** Metal solder tabs that provide mechanical strength to the PCB to prevent the connector from lifting during card insertion.
* **Keying:** A physical notch ensures the expansion card cannot be inserted upside down.
---
## 3. Common Applications
This part is typically found on the following PCBs:
1. **Industrial PCs:** For adding specialized I/O or communication modules.
2. **Laptops/Notebooks:** For Wi-Fi/Bluetooth "Combo" cards.
3. **Embedded Systems:** For integrating mSATA storage or 4G/LTE cellular modems.
---
## 4. Typical Footprint (Layout)
When designing a PCB for this part, the footprint follows the standard JEDEC/PCI-SIG specifications for Mini PCIe.
```text
Pin 1 [|||||] Pin 51 (Odd)
-------
[|||||]
Pin 2 [|||||] Pin 52 (Even)
```
*Note: The physical gap between the pin rows acts as the "key" to ensure correct module alignment.*
- ⤷
What is the difference between mPCIe and M.2 connectors?
- ⤷ How do I determine the correct stack height for this connector?
- ⤷ What are the soldering requirements for SMT Mini PCIe slots?