M2PRU-C7M-R
AI

The **M2PRU-C7M-R** is a specific model within the **ORICO** series of portable NVMe M.2 SSD enclosures. It is designed to bridge the gap between high-speed internal storage and external connectivity.
---
### 1. Technical Specifications
The device acts as a hardware bridge, converting the PCIe signal of an SSD into a USB signal.
| Feature | Specification |
| :--- | :--- |
| **Interface Protocol** | NVMe (PCIe Gen3 x4) |
| **Output Port** | USB 3.1 Gen2 Type-C |
| **Transfer Speed** | Up to 10Gbps |
| **Controller Chip** | Realtek RTL9210 |
| **Supported Sizes** | 2230, 2242, 2260, 2280 |
| **Material** | Aluminum Alloy + ABS Plastic |
---
### 2. Key Electronic Components
The "Electronic Parts" of this device revolve around its Printed Circuit Board (PCB) and the integrated circuits that manage data flow:
#### A. The Bridge Controller (Realtek RTL9210)
The heart of the M2PRU-C7M-R is the **Realtek RTL9210** bridge chip.
- **Function:** It translates the NVMe (PCIe) language into USB 3.1 Gen2 language.
- **Power Management:** It features low power consumption and supports the **UASP** (USB Attached SCSI Protocol) and **TRIM** commands, which are essential for maintaining SSD health and speed.
#### B. Thermal Management System
Because NVMe SSDs generate significant heat during high-speed transfers, the electronics are paired with:
- **Thermal Pads:** To conduct heat from the chips to the casing.
- **Fin-style Heat Sink:** The "C7M" variant often features a finned aluminum design to increase surface area for passive cooling.
#### C. Power Delivery Circuitry
The PCB contains voltage regulators that convert the 5V supplied by the USB port into the 3.3V required by the NVMe SSD. It includes:
- **Capacitors:** To stabilize voltage and prevent data corruption during minor power fluctuations.
- **Circuit Protection:** Over-current and short-circuit protection to safeguard the connected SSD.
---
### 3. Usage & Compatibility
- **Compatible SSDs:** Only M-Key or B+M Key NVMe PCIe SSDs. It is **not** compatible with older B-Key SATA M.2 drives.
- **Operating Systems:** Driver-free (Plug and Play) for Windows, macOS, and Linux.
```json
{
"device_type": "SSD Enclosure",
"max_bandwidth": "1250 MB/s",
"connector": "USB-C"
}
```
- ⤷
Does this enclosure support SATA M.2 drives or only NVMe?
- ⤷ What is the maximum storage capacity supported by the RTL9210 chip?
- ⤷ How does UASP improve the transfer speed of this device?