M2VT-C1-R2
AI

The **M2VT-C1-R2** is a high-performance, compact signal conditioner (transducer) manufactured by **M-System**. It is specifically designed to convert a V-Link (potentiometer) input into a standard DC output signal.
---
## 1. Technical Specifications
The model code `M2VT-C1-R2` breaks down into specific electronic configurations:
| Component Code | Description | Specifications |
| :--- | :--- | :--- |
| **M2VT** | Model Series | Mini-M Series V-Link Transmitter |
| **C** | Input Signal | Potentiometer (100 $\Omega$ to 10 k$\Omega$) |
| **1** | Output Signal | 4 – 20 mA DC (Load resistance max. 550 $\Omega$) |
| **R** | Power Input | 24V DC |
| **2** | Option | High-accuracy / Special Specifications |
---
## 2. Key Electronic Features
### A. Signal Conversion Logic
The device functions by applying a reference voltage across a potentiometer. As the wiper moves, the varying resistance is measured and linearized into a proportional current output (4-20mA). This is crucial for tracking the position of valves, actuators, or float levels.
### B. Isolation Structure
The M2VT series features **3-port isolation**. This means the following circuits are electrically separated from each other:
1. **Input** (Potentiometer)
2. **Output** (4-20mA loop)
3. **Power Supply** (24V DC)
*Benefit: This prevents ground loops and protects sensitive PLC/DCS equipment from electrical surges on the field side.*
### C. Construction & Mounting
* **Housing:** Flame-resistant resin (Black).
* **Terminal Block:** Base socket mounted. The electronic module can be removed from the base without disconnecting the wires, allowing for easy maintenance.
* **Adjustments:** Front-facing **Zero** and **Span** adjustments (multi-turn trimmers) for fine-tuning the 0% and 100% points.
---
## 3. Circuit Block Diagram (Simplified)
```mermaid
graph LR
A[Potentiometer Input] --> B[Input Amplifier]
B --> C{Isolation Transformer}
C --> D[Output Driver]
D --> E[4-20mA Output]
F[24V DC Power] --> C
```
---
## 4. Operational Requirements
* **Total Resistance:** Works with any potentiometer between $100 \Omega$ and $10 k\Omega$.
* **Excitation Voltage:** The device provides approximately $0.5V$ DC to the potentiometer to sense position.
* **Response Time:** $\leq$ 0.5 seconds (0 – 90%).
* **Accuracy:** $\pm 0.1\%$ of span.
- ⤷
What is the maximum allowable load resistance for the 4-20mA output?
- ⤷ Can this device be mounted on a standard DIN rail?
- ⤷ How do I perform a Zero and Span calibration on the M2VT?