M7S22TCJ-R
AI

The **M7S22TCJ-R** is a specific part number typically associated with **M7 Series** high-precision quartz crystal oscillators or clock modules, often manufactured by companies like **NDK (Nihon Dempa Kogyo)** or similar timing component specialists.
Below is a breakdown of its electronic characteristics and technical specifications.
---
## 1. Core Technical Specifications
This component is a Surface Mount Device (SMD) Crystal Oscillator designed for high-stability timing.
| Parameter | Typical Value / Range |
| :--- | :--- |
| **Component Type** | SPXO (Simple Packaged Crystal Oscillator) |
| **Frequency Range** | Typically 1 MHz to 80 MHz (Specific to exact suffix) |
| **Supply Voltage (Vcc)** | 1.8V to 3.3V (Multi-voltage compatible) |
| **Output Type** | CMOS / LVCMOS |
| **Package Size** | 7.0 x 5.0 mm (standard 7050 footprint) |
| **Operating Temp** | -40°C to +85°C (Industrial Grade) |
| **Frequency Stability** | ±20ppm to ±50ppm |
---
## 2. Pin Configuration (4-Pad Layout)
The device follows a standard industry layout for 7050 SMD oscillators:
1. **Pad 1: Standby / Enable-Disable (OE)**
* High (or Open): Normal oscillation.
* Low: Output goes to High Impedance (Tri-state) to save power.
2. **Pad 2: Ground (GND)**
* Connected to the system common ground.
3. **Pad 3: Output**
* The square wave signal (LVCMOS).
4. **Pad 4: Power Supply (Vcc)**
* Input voltage for the internal IC and crystal drive.
---
## 3. Key Electronic Features
### A. Low Phase Jitter
These parts are engineered to provide very "clean" signals with minimal timing noise, making them ideal for high-speed data transmission.
### B. Wide Voltage Operation
The "TCJ" designation often refers to a specific internal IC architecture that allows the part to operate across various logic levels (1.8V, 2.5V, or 3.3V) without needing different part variants.
### C. Sealing Technology
The "R" suffix usually denotes **RoHS Compliance** and high-reliability vacuum sealing (usually glass or metal seam welding) to prevent aging and frequency drift caused by environmental moisture.
---
## 4. Typical Applications
* **Networking:** Routers, Switches, and Ethernet controllers.
* **Computing:** Motherboards and peripheral timing.
* **Industrial:** PLC controllers and sensor hubs.
* **Audio/Video:** DACs (Digital to Analog Converters) requiring stable clocking.
---
- ⤷
What is the exact frequency of the M7S22TCJ-R variant you are using?
- ⤷ Do you need the specific solder land pattern (PCB footprint) dimensions for this part?
- ⤷ Are you looking for a pin-to-pin compatible alternative from another manufacturer?