M95010-RBN6TP
AI

The **M95010-RBN6TP** is a specific type of Non-Volatile Memory (NVM) produced by STMicroelectronics. It is an Electrically Erasable Programmable Read-Only Memory (**EEPROM**) commonly used for parameter storage in electronic circuits.
---
## 1. Technical Specifications
The following table outlines the primary electrical and physical characteristics of the device:
| Parameter | Detail |
| :--- | :--- |
| **Memory Size** | 1 Kbit (128 Bytes x 8 bits) |
| **Interface** | SPI (Serial Peripheral Interface) |
| **Clock Frequency** | Up to 20 MHz (at 5V) |
| **Operating Voltage** | 1.8V to 5.5V |
| **Package Type** | SO8N (Narrow Plastic Small Outline, 8 pins) |
| **Temperature Range** | -40°C to +85°C (Industrial Grade) |
| **Write Cycles** | 4 Million cycles (approx.) |
| **Data Retention** | 200 Years |
---
## 2. Key Electronic Features
* **SPI Protocol:** It supports Mode 0 (0,0) and Mode 3 (1,1). It uses four signals: Chip Select ($\bar{S}$), Serial Clock (C), Serial Data Input (D), and Serial Data Output (Q).
* **Byte and Page Write:** It allows for writing a single byte or a full page (up to 16 bytes) in a single instruction.
* **Hardware Protection:** Includes a Write Protect ($\bar{W}$) pin to prevent accidental data overwrites and a Hold ($\bar{HOLD}$) pin to pause communication without deselecting the device.
* **Low Power Consumption:** Optimized for battery-operated devices with low standby and active current.
---
## 3. Part Number Breakdown
Understanding the suffix `RBN6TP` is critical for sourcing the correct part:
1. **M95010:** Base part number (1 Kbit SPI EEPROM).
2. **R:** Operating voltage range (1.8V to 5.5V).
3. **BN:** Package code for SO8N (150 mil width).
4. **6:** Device grade (Industrial temperature, -40 to 85°C).
5. **T/P:** Packing information (Tape and Reel / Lead-free and RoHS compliant).
---
## 4. Typical Connection Diagram
```text
MCU (Master) M95010 (Slave)
+----------------+ +----------------+
| SCK |------> | C (Clock) |
| MOSI |------> | D (Input) |
| MISO |<------ | Q (Output) |
| CS |------> | S (Select) |
+----------------+ +----------------+
```
---
- ⤷
How do the 'Write Protect' and 'Hold' pins function in a real-world circuit?
- ⤷ What are the common alternatives to the M95010 if higher memory capacity is needed?
- ⤷ Can you provide an example of the SPI command sequence to read a byte from this EEPROM?