M95320-RMB3P
AI

The **M95320-RMB3P** is a specific variant of a serial SPI (Serial Peripheral Interface) EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by STMicroelectronics.
---
### 1. General Specifications
The part number can be broken down to understand its core electronic characteristics:
| Parameter | Specification |
| :--- | :--- |
| **Memory Size** | 32 Kbit (4,096 bytes x 8 bits) |
| **Interface** | SPI (Serial Peripheral Interface) |
| **Clock Frequency** | Up to 20 MHz |
| **Operating Voltage** | 1.8V to 5.5V (Low voltage range) |
| **Operating Temperature** | -40°C to +125°C |
| **Package Type** | UFDFPN8 (Ultra-thin Fine pitch Dual Flat No-lead) |
---
### 2. Key Electronic Features
* **Write Protection:** Includes a hardware Write Protect (`W#`) pin and a software-defined Status Register to prevent accidental data overwriting.
* **Endurance:** High reliability with up to **4 million write cycles**.
* **Data Retention:** Rated for more than **200 years**, making it ideal for long-term configuration storage.
* **Byte and Page Write:** Supports writing a single byte or a full page (up to 32 bytes) in a single instruction cycle.
* **Self-Timed Write Cycle:** The internal write cycle is automatically timed (typically 5ms), freeing up the MCU for other tasks during the physical write process.
---
### 3. Pinout Configuration (UFDFPN8)
The device typically follows the standard SPI EEPROM pinout:
| Pin | Name | Description |
| :--- | :--- | :--- |
| 1 | `S#` | Chip Select (Active Low) |
| 2 | `Q` | Serial Data Output (MISO) |
| 3 | `W#` | Write Protect |
| 4 | `Vss` | Ground |
| 5 | `D` | Serial Data Input (MOSI) |
| 6 | `C` | Serial Clock |
| 7 | `HOLD#` | Pause Serial Communication |
| 8 | `Vcc` | Supply Voltage |
---
### 4. Part Number Decoder (M95320-RMB3P)
The suffix provides critical information regarding the physical and electrical environment:
* **M95**: Family (SPI Serial Access EEPROM)
* **320**: Density (32 Kbit)
* **-R**: Operating Voltage (1.8V to 5.5V)
* **MB**: Package (UFDFPN8, 2x3mm)
* **3**: Temperature Range (-40°C to +125°C / Automotive Grade 1 or High-End Industrial)
* **P**: Sustainability (RoHS compliant, Halogen-free)
---
- ⤷What is the maximum SPI clock speed supported by this chip?
- ⤷ How does the 'HOLD#' pin function during an active SPI session?
- ⤷ What are the typical power consumption levels in Standby mode?