MA7HFCX-R
AI

The **MA7HFCX-R** is a high-reliability, micro-miniature connector part of the **MA7 Series** produced by **Micro-Mode Products** (now part of ITT Cannon). These connectors are designed specifically for high-frequency microwave applications where space is limited and environmental durability is critical.
---
### 1. Technical Specifications
The MA7 series is characterized by its "push-on" blind-mate interface, similar to SMP or SMPM standards but with proprietary enhancements for military and aerospace grade reliability.
| Parameter | Specification (Typical) |
| :--- | :--- |
| **Connector Type** | Micro-Miniature Coaxial |
| **Frequency Range** | DC to 40 GHz (depending on configuration) |
| **Impedance** | 50 Ohms |
| **Coupling Mechanism** | Push-on / Blind-mate |
| **Material (Body)** | Stainless Steel (Gold plated or Passivated) |
| **Dielectric** | PTFE (Teflon) |
| **Operating Temp** | -65°C to +165°C |
---
### 2. Part Number Breakdown (MA7HFCX-R)
While specific internal codes can vary by manufacturer revisions, the nomenclature generally follows this logic:
* **MA7**: The Series identifier (Micro-Miniature high-density series).
* **HFC**: Often denotes "High Frequency" or a specific "Hermetic" glass-to-metal seal configuration for vacuum/pressure environments.
* **X**: Typically a placeholder for specific plating or mounting options (e.g., surface mount, flange, or cable type).
* **-R**: Generally indicates **RoHS Compliance** (Lead-free) or **Right-Angle** geometry.
---
### 3. Key Electronic Features
* **Blind-Mate Capability:** Designed to allow for a certain amount of radial and axial misalignment. This is essential for "plug-in" modules where you cannot manually thread a connector.
* **Low VSWR:** Optimized internal geometry ensures minimal signal reflection even at frequencies exceeding 20 GHz.
* **Hermeticity:** If the "H" indicates hermetic, the part uses a glass-to-metal seal to prevent the leakage of gases, making it suitable for satellite payloads or pressurized cockpit instruments.
---
### 4. Common Applications
Due to its high performance and small footprint, the MA7HFCX-R is typically found in:
1. **Phased Array Antennas:** Used to connect multiple antenna elements in a tight grid.
2. **Military Radar:** Signal processing units where high-speed data and RF signals must be routed between boards.
3. **Space/Satellite Hardware:** Where weight and size are restricted, but vacuum-sealed reliability is required.
4. **Test & Measurement:** High-density switch matrices.
---
- ⤷
What is the difference between the MA7 series and standard SMP connectors?
- ⤷ Can you provide the footprint layout for PCB mounting this part?
- ⤷ How does the 'Hermetic' seal affect the signal integrity of this connector?