S02-07-R-9CS925
AI

The part number **S02-07-R-9CS925** refers to a high-performance **SolderSleeve Shield Terminator** manufactured by TE Connectivity (Raychem). These components are engineered to provide a reliable, insulated, and strain-relieved electrical connection for cable shielding.
---
### 1. Technical Specifications
| Feature | Specification |
| :--- | :--- |
| **Manufacturer** | TE Connectivity / Raychem |
| **Series** | S02 (M83519 Compatible) |
| **Component Type** | SolderSleeve / Shield Terminator |
| **Lead Finish** | Pre-installed Solder Preform with Flux |
| **Insulation Material** | Radiation-crosslinked Polyvinylidene Fluoride (PVDF) |
| **Temperature Rating** | -55°C to +150°C |
| **Voltage Rating** | Up to 2000V (depending on environment) |
---
### 2. Physical Design & Composition
The S02-07-R-9CS925 is composed of four primary integrated elements:
1. **Heat-Shrinkable Sleeve:** A transparent, blue-tinted PVDF sleeve that provides environmental sealing and electrical insulation.
2. **Solder Preform:** A precise amount of solder (Sn63/Pb37 with ROL1 flux) that melts when heated to create the electrical bond.
3. **Thermoplastic Sealing Rings:** Located at each end of the sleeve; these melt and flow to provide a moisture-proof seal.
4. **Pre-installed Lead:** This specific part includes a **ground lead** (typically a high-temperature wire) already attached to the solder ring to simplify the grounding process.
---
### 3. Part Number Breakdown (Nomenclature)
The alphanumeric code provides specific details about the configuration:
| Segment | Meaning |
| :--- | :--- |
| **S02** | Indicates the series (High temperature, immersion resistant) |
| **-07** | Size code (Determines the diameter of the cables it can accept) |
| **-R** | Indicates the presence of a **Pre-installed Lead** |
| **-9** | Lead color (White) |
| **CS925** | Specific material or lead wire specification (often MIL-spec wire) |
---
### 4. Applications
These terminators are used in environments where reliability is critical and space is limited:
* **Aerospace & Defense:** Grounding braided shields on MIL-DTL-38999 connectors.
* **Marine Electronics:** Providing corrosion-resistant terminations.
* **Industrial Automation:** Protecting signal integrity in EMI-heavy environments.
---
### 5. Installation Process
1. **Preparation:** Strip the jacket of the cable to expose the braid and strip the end of the ground wire.
2. **Positioning:** Slide the S02 sleeve over the exposed braid and align the solder preform.
3. **Heating:** Use a calibrated heat gun with a reflector nozzle. The heat shrinks the sleeve, melts the sealing rings, and flows the solder into the braid simultaneously.
4. **Inspection:** The transparent sleeve allows for visual verification of the solder flow (the "fillet").
- ⤷What is the maximum diameter cable that the -07 size can accommodate?
- ⤷ Is there a lead-free (RoHS compliant) alternative to this part?
- ⤷ What specific heat gun temperature is recommended for PVDF SolderSleeves?