SSL0705M-R15MF-R46
AI

The **SSL0705M-R15MF-R46** is a surface-mount (SMD) power inductor commonly used in DC-DC converters and power supply filtering. This specific part belongs to a category of high-current, low-profile magnetic components.
---
### 1. Part Number Breakdown (Typical Nomenclature)
While nomenclature can vary slightly by manufacturer, the code generally follows this structure:
| Segment | Meaning | Description |
| :--- | :--- | :--- |
| **SSL** | Series Prefix | Usually refers to Shielded/Semi-Shielded Low Profile series. |
| **0705** | Case Size | Dimensions approx. 7.0mm x 7.0mm (Width x Length). |
| **M** | Material/Tolerance | Often denotes a ±20% inductance tolerance. |
| **R15** | Inductance Value | **0.15 µH** (R denotes the decimal point). |
| **MF-R46** | Revision/Packaging | Specific factory coating, core material type, or tape-and-reel specs. |
---
### 2. Key Technical Specifications
Based on the standard parameters for the 0705 series at 0.15µH:
* **Inductance:** 0.15 µH (Very low inductance, typical for high-frequency switching).
* **DC Resistance (DCR):** Extremely low (often < 5 mΩ) to minimize power loss.
* **Saturation Current ($I_{sat}$):** High capacity, typically ranging from 10A to 20A+ depending on the core material.
* **Operating Temperature:** Generally -40°C to +125°C.
* **Construction:** Magnetic shielding to reduce Electromagnetic Interference (EMI).
---
### 3. Applications and Use Cases
Because of the very low inductance (0.15 µH) and high current capability, this part is used in:
1. **Voltage Regulator Modules (VRMs):** Used in motherboards and GPU power phases.
2. **Point of Load (POL) Converters:** Providing stable voltage to CPUs or FPGAs.
3. **High-Frequency DC-DC Converters:** Where switching frequencies are high enough to allow small inductance values.
4. **Battery Management Systems:** High-efficiency power paths.
---
### 4. Comparison Table: Why R15?
| Feature | 0.15 µH (Low L) | 10 µH (High L) |
| :--- | :--- | :--- |
| **Switching Frequency** | Best for High MHz range | Best for Lower KHz range |
| **Physical Size** | Can be smaller for same current | Usually larger for same current |
| **Ripple Current** | Higher ripple | Lower ripple |
| **Transient Response** | Very Fast | Slower |
---
- ⤷
What are the equivalent alternative part numbers for the SSL0705 series?
- ⤷ How does the 0.15 uH inductance value affect the ripple current in a buck converter?
- ⤷ What is the specific saturation current rating for the R46 suffix version?