AI

The **TZ4H-R2R** is a high-performance, dual-display digital temperature controller manufactured by **Autonics**. It belongs to the TZ series, known for its high accuracy and PID control capabilities.
### 1. Model Breakdown
Understanding the specific suffix is crucial for identifying its electronic capabilities:
| Code Part | Description |
| :--- | :--- |
| **TZ4** | Model Series (DIN W96 x H48 mm size) |
| **H** | High Accuracy / High Functionality |
| **-R** | Control Output: **Relay Contact** (250VAC 3A) |
| **2** | Power Supply: **100–240VAC** (50/60Hz) |
| **R** | Sub-Output (Alarm): **Relay Output 1 + Relay Output 2** |
---
### 2. Key Electronic Specifications
The internal circuitry is designed for precision and industrial stability.
#### A. Input Types (Multi-Input)
The device uses a universal input stage, meaning it can be programmed to accept various sensors without hardware changes:
* **Thermocouple:** K, J, R, S, B, E, T, L, N, U, W, PLII.
* **RTD:** Pt100Ω, JPt100Ω.
* **Voltage/Current:** 1-5VDC, 0-10VDC, 4-20mA (requires external shunt resistor for mA).
#### B. Output Stage (The "R" in R2R)
The **Control Output** is a mechanical relay.
* **Type:** SPST (1a).
* **Capacity:** 250VAC 3A or 30VDC 3A (Resistive load).
* **Life Expectancy:** Mechanical min. 5,000,000 operations; Electrical min. 100,000 operations.
#### C. Control Method
The TZ4H uses an internal microprocessor to execute two main control algorithms:
1. **PID Control:** Utilizes Auto-tuning to calculate Proportional, Integral, and Derivative constants for precise temperature maintenance.
2. **ON/OFF Control:** A simple hysteresis-based switching logic.
---
### 3. Wiring Terminal Configuration
The back of the unit features a terminal block for electronic connections. Below is a typical mapping for the TZ4H series:
| Terminal No. | Function | Description |
| :--- | :--- | :--- |
| **1 - 2** | Power Input | 100-240VAC Line/Neutral |
| **3 - 5** | Control Output | Relay Contact (COM/NO) |
| **6 - 8** | Alarm 1 / 2 | Sub-relay outputs for safety triggers |
| **10 - 12** | Sensor Input | Pins for RTD (A, B, b) or Thermocouple (+ / -) |
---
### 4. Technical Performance Features
* **Display Accuracy:** ±0.3% (Full Scale) or ±1°C (whichever is greater).
* **Sampling Cycle:** 500ms.
* **Dielectric Strength:** 2,000VAC 50/60Hz for 1 minute (between input terminals and power terminals).
* **Insulation Resistance:** Min. 100MΩ (at 500VDC megger).
- ⤷
How do I wire a 4-20mA sensor to the TZ4H-R2R?
- ⤷ What is the difference between the TZ4H and the TCN series?
- ⤷ How do I perform Auto-Tuning on this specific model?