VBO20-12NO2
AI

The **VBO20-12NO2** is a high-performance single-phase bridge rectifier manufactured by IXYS (now a part of Littelfuse). It is designed to convert alternating current (AC) into direct current (DC) in industrial applications.
---
### ## Technical Specifications
The part number provides specific details about its ratings and characteristics:
| Parameter | Specification | Description |
| :--- | :--- | :--- |
| **Circuit Type** | Single Phase Bridge | Full-wave rectification |
| **$V_{RRM}$** | 1200 V | Maximum repetitive reverse voltage |
| **$I_{dAV}$** | 20 A | Average forward current (at $T_C = 110^\circ C$) |
| **$I_{FSM}$** | 300 A | Surge current (10ms, half-sine wave) |
| **$V_F$** | ~1.1 V | Forward voltage drop per diode |
| **Package** | PWS-A | Standard screw-terminal / solder-pin housing |
---
### ### Key Features
* **Planar Passivated Chips:** Ensures low leakage current and high reliability over the component's lifetime.
* **Isolation:** The internal chips are electrically isolated from the metal base plate (typically rated up to 2500V~), allowing multiple modules to be mounted on the same heatsink.
* **Robustness:** High surge current capability ($I_{FSM}$) allows the device to handle temporary overloads without failure.
* **Easy Mounting:** Features a single-screw mounting hole and terminal pins suitable for soldering or wave soldering.
---
### ### Pinout and Internal Diagram
The device contains four diodes connected in a bridge configuration:
```text
AC Input (~) ---->|----+---- (+) DC Output
| |
AC Input (~) ---->|----+---- (-) DC Output
```
* **Terminals 1 & 2:** AC Input (Phase and Neutral).
* **Terminal 3:** Positive (+) DC Output.
* **Terminal 4:** Negative (-) DC Output.
---
### ### Typical Applications
The VBO20-12NO2 is commonly found in the following systems:
1. **Switch Mode Power Supplies (SMPS):** Input rectification stage.
2. **DC Motor Drives:** Converting mains AC to variable DC.
3. **Battery Chargers:** Providing steady DC current for high-capacity batteries.
4. **Input Rectifiers for Inverters:** Used in variable frequency drives (VFDs).
- ⤷
What are the heat dissipation requirements for the VBO20-12NO2 at full load?
- ⤷ Can this bridge rectifier be used in a 3-phase system?
- ⤷ What are the pin-compatible alternatives for this specific IXYS module?