General Description
The AAT3190 charge pump controller provides the regulated positive and negative voltage biases required by active matrix thin-film transistor (TFT) liquid-crystal displays (LCDs), charge-coupled device (CCD) sensors, and organic light emitting diodes (OLEDs). Two low-power charge pumps convert input supply voltages ranging from 2.7V to 5.5V into two independent output voltages.

Features
• VIN Range: 2.7V to 5.5V
• Adjustable ± Dual Charge Pump
• Positive Supply Output Up to +25V
• Negative Supply Output Down to -25V
• Up to 30mA Output Current
• 1.0MHz Switching Frequency
• <1.0µA Shutdown Current
• Internal Power MOSFETs
• Internally Controlled Soft Start
• Fast Transient Response
• Ultra-Thin Solution (No Inductors)
• -40°C to +85°C Temperature Range
• Available in 8-Pin MSOP or 12-Pin TSOPJW Package

Applications
• CCD Sensor Voltage Bias
• OLEDs
• Passive-Matrix Displays
• Personal Digital Assistants (PDAs)
• TFT Active-Matrix LCDs