Office Machine Switching Power Supply

The TOSHIBA TLP747GF consists of a photo−thyristor optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP. All parameters are tested to the specification of TLP747G. (both condition and limits)

• Peak off−state voltage: 400V min.
• Trigger LED current: 15mA max.
• On−state current: 150mA max.
• UL recognized: UL1577, file no. E67349
• BSI approved: BS EN60065: 2002
   Certificate no. 7364
   BS EN60950-1: 2002
   Certificate no. 7365
• SEMCO approved:EN60065,EN60950-1,EN60335-1 Certificate no.302586
• Isolation voltage: 4000Vrms min.
• Option (D4) type
   VDE approved: DIN EN 60747-5-2,
                       Certificate no.40009373
   Maximum operating insulation voltage: 890, 1130VPK
   Highest permissible over voltage: 6000, 8000VPK
   (Note) When an EN 60747-5-2 approved type is needed,
   please designate the “ Option (D4) ”
• Creepage distance: 8.0mm (min.)
   Clearance: 8.0mm (min.)
   Internal creepage path: 4.0mm (min.)
   Insulation thickness: 0.5mm (min.)
• Conforming safety standards:
   DIN 57 804. VDE0804 / 1.83
   DIN IEC65 / VDE0860 / 8.81
   DIN IEC380 / VDE0806 / 8.81
   DIN IEC435 / VDE0805 / draft nov. 84
   DIN IEC601T1 / VDE0750T1 / 5.82
   BS7002: 1989 (EN60950)