GENERAL DESCRIPTION
AD8152 is a member of the Xstream line of products and is a breakthrough in digital switching, offering a large switch array (34 × 34) on very little power, typically 2.0 W. Additionally, it operates at data rates up to 3.2 Gbps per port, making it suitable for Sonet/SDH OC-48 with Forward Error Correction (FEC).
The AD8152’s useful supply voltage range allows the user to operate at LVPECL/CML data levels down to 2.5 V. The control interface is LVTTL or LVCMOS compatible on 2.5 V to 3.3 V.
The AD8152’s fully differential signal path reduces jitter and crosstalk while allowing the use of smaller single-ended voltage swings. It is offered in a 256-ball SBGA package that operates over the industrial temperature range of 0°C to 85°C.

FEATURES
   Low Cost
   Low Power
      2.0 W @ 2.5 V (Outputs Enabled)
      <100 mW @ 2.5 V (Outputs Disabled)
   34 x 34, Fully Differential, Nonblocking Array
   3.2 Gbps per Port NRZ Data Rate
   Wide Power Supply Range: 2.5 V to 3.3 V
   LVTTL or LVCMOS Level Control Inputs:
      @ 2.5 V to 3.3 V
   Low Jitter: 45 ps
   Drives a Backplane Directly
   Programmable Output Swing
      100 mV to 1.6 V Differential
      50Ω On-Chip I/O Termination
      User Controlled Voltage at the Load
         Minimizes Power Dissipation
   Dual Rank Latches
   Available in 256-Ball Grid Array

APPLICATIONS
   Fiber Optic Network Switching
   High Speed Serial Backplane Routing to OC-48 with FEC
   Gigabit Ethernet
   Digital Video (HDTV)
   Data Storage Networks