Features
■ Medium weight Paper Release Liner − Clear, Strong Film Carrier Composition: Tape Caliper, without liner 5 mil (0.13mm) High Adhesion Double Coated Medical Tape Carrier 0.92 mil (0.023 mm) Transparent Polyester Film Adhesive, both sides Synthetic Rubber, designed for medical device construction Release Liner 60 lb. Bleached Kraft paper, silicone release coated both sides (3.5 mil/0.09 mm) Properties+: 180° Peel Adhesion to Stainless Steel 175 oz/inch width (4.96 Kg/25 mm) (48.7 N/25 mm) Release from Liner 40 gm/inch width (40 gm/25 mm) + 3M test methods available upon request. Roll Description: Tape supplied on 3 inch (76 mm) diameter cores. Length 700 yards (640 m) ± 2% Maximum Width 48 inch (122 cm) ± 1/32 in (1.0 mm) Current Splices: Splices on the tape are intended for continuous processing. Roll Width Maximum Number of Splices per Roll < 8 inch (20 cm) 2 per 100 yd (91 m) 3 per 200 yd (183 m) 8 per 700 yd (640 m) Information on the splice frequency in roll widths greater than 8 inch (20 cm) is available upon request. Packaging and Recommended Storage Product as supplied in original packaging will maintain stated properties for a period of two [2] years from date stamped on shipping container when stored at temperatures of 50-80°F (10-27°C) and a relative humidity between 40-60 percent. Please see reverse side for important product, safety and warranty information.