|
General The ICS1893BF is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards, ISO/IEC 8802-3. The ICS1893BF is intended for MII, Node applications that require the Auto-MDIX feature that automatically corrects crossover errors in plant wiring. The ICS1893BF incorporates Digital-Signal Processing (DSP) control in its Physical-Medium Dependent (PMD) sub layer. As a result, it can transmit and receive data on unshielded twisted-pair (UTP) category 5 cables with attenuation in excess of 24 dB at 100MHz. With this ICS-patented technology, the ICS1893BF can virtually eliminate errors from killer packets. The ICS1893BF provides a Serial-Management Interface for exchanging command and status information with a Station-Management (STA) entity. The ICS1893BF Media-Dependent Interface (MDI) can be configured to provide either half- or full-duplex operation at data rates of 10 Mb/s or 100Mb/s. Features • Supports category 5 cables with attenuation in excess of 24dB at 100 MHz. • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sub layers functions of IEEE standard. • 10Base-T and 100Base-TX IEEE 8802.3 compliant • Single 3.3V power supply • Highly configurable, supports: – Media Independent Interface (MII) – Auto-Negotiation with Parallel detection – Node applications, managed or unmanaged – 10M or 100M full and half-duplex modes – Loopback mode for Diagnostic Functions – Auto-MDI/MDIX crossover correction • Low-power CMOS (typically 400 mW) • Power-Down mode typically 21mW • Clock and crystal supported • Fully integrated, DSP-based PMD includes: – Adaptive equalization and baseline-wander correction – Transmit wave shaping and stream cipher scrambler – MLT-3 encoder and NRZ/NRZI encoder • Small footprint 48-pin 300 mil. SSOP package • Also available in small footprint 56-pin 8x8 MLF2 package • Available in Industrial Temp and Lead Free Applications: NIC cards, PC motherboards, switches, routers, DSL and cable modems, game machines, printers.
|