Description
The X-NUCLEO-IDB05A2 Bluetooth low energy expansion board is based on the BlueNRG-M0 BLE network processor module. The BlueNRG-M0 is Bluetooth v4.2 compliant, FCC and IC certified (FCC ID: S9NBNRGM0AL; IC: 8976C-BNRGM0AL). It supports simultaneous master/slave roles and can behave as a Bluetooth low energy sensor and hub device at the same time. The BlueNRG-M0 provides a complete RF platform in a tiny form factor, with integrated radio, antenna, high frequency and LPO oscillators. The X-NUCLEO-IDB05A2 is compatible with the ST morpho (not mounted) and Arduino UNO R3 connector layout. The X-NUCLEO-IDB05A2 interfaces with the STM32 microcontroller via the SPI pin and allows changing the default SPI clock, SPI chip select and SPI IRQ by replacing a resistor on the expansion board. Product summary Bluetooth low energy expansion board based on the BLUENRG-M0A module for STM32 Nucleo X-NUCLEOIDB05A2 Very low power network processor module for Bluetooth low energy v4.2 BlueNRG-M0 Bluetooth Low Energy Network Processor supporting Bluetooth 4.2 core specification BlueNRG-MS

Features
■ STM32 Nucleo expansion board based on the BlueNRG-M0 Bluetooth v4.2 compliant, FCC and IC certified module (FCC ID: S9NBNRGM0AL; IC: 8976C- BNRGM0AL)
■ BlueNRG-M0 main features: – Embedded Bluetooth low energy protocol stack (GAP, GATT, SM, L2CAP, LL, RFPHY) – Embedded BlueNRG-MS network processor – On-board chip antenna
■ Small form factor: 11.5 mmx13.5 mm
■ Equipped with Arduino UNO R3 connector
■ Scalable solution capable of cascading multiple boards for larger systems
■ Free comprehensive development firmware library and samples for BlueNRG- MS, compatible with STM32Cube firmware
■ RoHS compliant