Description
The X-NUCLEO-OUT02A1 industrial digital output expansion board for STM32 Nucleo is based on the ISO8200AQ galvanic isolated octal high-side smart power solid state-relay. It provides an affordable and easy-to-use solution for the development of 8-channel digital output modules, letting you easily evaluate the ISO8200AQ communication and industrial load driving features. The X-NUCLEO-OUT02A1 can be connected to a NUCLEO-F401RE or NUCLEOF334R8 development board via Arduino™ UNO R3 connectors. You can also evaluate the 16-channel digital output modules by connecting two XNUCLEO-OUT02A1 expansion boards and activating the daisy chaining feature. The X-NUCLEO-OUT02A1 interfaces with the STM32 controller via SPI and GPIO pins and is compatible with the Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. Industrial PLC functionality with 8 inputs and 16 outputs can be added with the XNUCLEO-PLC01A1 expansion board. Product summary Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo X-NUCLEOOUT02A1 Industrial input/output expansion board based on VNI8200XP and CLT01-38SQ7 for STM32 Nucleo X-NUCLEOPLC01A1 Galvanic isolated octal high-side smart power solid state-relay ISO8200AQ STM32 Nucleo-64 development board with STM32F401RE/ STM32F334R8 MCU NUCLEOF401RE/ NUCLEOF334R8 Industrial digital output expansion board based on ISO8200AQ for STM32 Nucleo X-NUCLEO-OUT02A1 Data brief DB3767 - Rev 2 - November 2018 For further information contact your local STMicroelectronics sales office.

Features
■ Based on the ISO8200AQ whose main characteristics are: – Embedded 4kV galvanic isolation – Radio frequency communication between the logic and process sides for maximum noise immunity – Very low power dissipation (RON(MAX) = 220 mΩ) – Fast decay for inductive loads – 20 MHz SPI I/F on logic side – VCC power good diagnostics – Overload and overheating protections with thermal shutdown and diagnostics – QFN-32L (9x11x1 mm) package
■ 10.5 to 33 V operating voltage range
■ Green LED (x8) for output on/off status
■ Red LED for process supply power good fault
■ Red LED for overload and overheating
■ Supply reverse polarity protection
■ EMC compliance according to IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
■ Compatible with STM32 Nucleo boards
■ Equipped with Arduino™ UNO R3 connectors
■ CE certified
■ RoHS and China RoHS compliant
■ WEEE compliant