Features

ESD Protect for 5 Lines with Uni-directional

Provide ESD protection for the protected line to
IEC 61000-4-2 (ESD) ±15kV (air), ±12kV (contact)
IEC 61000-4-4 (EFT) 30A (5/50ns)
Cable Discharge Event (CDE)

Small package saves board space

Protect five I/O lines or five power lines

Fast turn-on and Low clamping voltage

Low operating voltage: 5.0V and below

Solid-state silicon-avalanche and active circuit
triggering technology

Green part
Applications

Audio Interfaces Protection

Computer Interfaces Protection

Microprocessors Protection

Serial and Parallel Ports Protection

Control Signal Lines Protection

Power lines on PCB Protection

Latchup Protection
Description
AZ2015-05R is a design which includes five
uni-directional ESD rated clamping cells to
protect five power lines, or five control lines, or
five low speed data lines in an electronic systems.
The AZ2013-05R has been specifically designed
to protect sensitive components which are
connected to power and control lines from
over-voltage damage and latch-up caused by
Electrostatic Discharging (ESD), Electrical Fast
Transients (EFT), and Cable Discharge Event
(CDE).
AZ2015-05R is a unique design which includes
proprietary clamping cells in a single package.
During transient conditions, the proprietary
clamping cells prevent over-voltage on the power
lines or control/data lines, protecting any
downstream components.
AZ2015-05R may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4
(±15kV air, ±8kV contact discharge).