GENERAL DESCRIPTION

The PIC10F200/202/204/206 devices from Microchip Technology are low-cost, high-performance, 8-bit, fully static, Flash-based CMOS microcontrollers. They employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions are single cycle (1μs) except for program branches, which take two cycles. The PIC10F200/202/204/206 devices deliver performance in an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, result ing in a typical 2:1 code compression over other 8-bit

microcontrollers in its class. The easy-to-use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:

• Only 33 single-word instructions to learn

• All single-cycle instructions except for program branches, which are two-cycle

• 12-bit wide instructions

• 2-level deep hardware stack

• Direct, Indirect and Relative Addressing modes for data and instructions

• 8-bit wide data path

• 8 Special Function Hardware registers

• Operating speed:

  - 4 MHz internal clock

  - 1μs instruction cycle



Special Microcontroller Features:

• 4 MHz precision internal oscillator:

  - Factory calibrated to ±1%

• In-Circuit Serial Programming™ (ICSP™)

• In-Circuit Debugging (ICD) support

• Power-on Reset (POR)

• Device Reset Timer (DRT)

• Watchdog Timer (WDT) with dedicated on-chip RC oscillator for reliable operation

• Programmable code protection

• Multiplexed MCLRinput pin

• Internal weak pull-ups on I/O pins

• Power-Saving Sleep mode

• Wake-up from Sleep on pin change

Low-Power Features/CMOS Technology:

• Operating Current:

  - < 175μA @ 2V, 4 MHz, typical

• Standby Current:

  - 100 nA @ 2V, typical

• Low-power, high-speed Flash technology:

  - 100,000 Flash endurance

  - > 40 year retention

• Fully static design

• Wide operating voltage range: 2.0V to 5.5V

• Wide temperature range:

  - Industrial: -40°C to +85°C

  - Extended: -40°C to +125°C

Peripheral Features (PIC10F200/202):

• 4 I/O pins:

  - 3 I/O pins with individual direction control

  - 1 input-only pin

  - High current sink/source for direct LED drive

  - Wake-on-change

  - Weak pull-ups

• 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler



Peripheral Features (PIC10F204/206):

• 4 I/O pins:

  - 3 I/O pins with individual direction control

  - 1 input-only pin

  - High current sink/source for direct LED drive

  - Wake-on-change

  - Weak pull-ups

• 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler

• 1 Comparator:

  - Internal absolute voltage reference

  - Both comparator inputs visible externally

  - Comparator output visible externally