FEATURES
GENERAL
Serial Peripheral Interface
 Mode 0 and Mode 3
Standard, Quad SPI
 Standard SPI : SCLK, CS#, SI, SO
 Quad SPI : SCLK, CS#, SIO0, SIO1,
SIO2/W#, SIO3/Hold#
Single power supply operation
 Full voltage range: 2.7V to 3.6V read, erase and program operations
Organization
 Memory Cell Array : (128M + 4M) x Bytes
 Data Register : (2048 + 64) x Bytes
Automatic Program and Erase
 Page Program : (2048 + 64) x Bytes
 Block Erase : (128K + 4K) x Bytes = 64pages
Page Read Operation
 Page Size : (2048 + 64) Bytes
 Page Read(cell array to page buffer) : 25us(Max.)
 Serial Page Access : 104MHz, 133MHz(CL=15pF)
Fast Write Cycle Time
 Program time : 200us(Typ.)
 Block Erase time : 2ms(Typ.)
Electronic Identification
 JEDEC standard 1-byte manufacturer ID and 1-byte device ID.
Copy-Back PROGRAM Operation
 Fast Page copy without external buffering
Security features
 OTP area, 16K bytes(8 pages)
Hardware Data Protection
 Program / Erase locked during Power transitions.
 W# pin works in conjunction with Status Register Bits to protect specified memory areas. Status Register Block Protection bits (BP2, BP1, BP0) in status register configure parts of memory as read-only
Data Integrity
 Endurance:100K Program/Erase Cycles
 Data Retention : 10 years
Error Management
 Internal ECC code generation
 1bit/528byte ECC, 1NOP/528byte
Package
 8-pad 8x6 WSON
 16-pin SOIC 300 mil