Inline, Bus coupler, Modbus/TCP(UDP), RJ45 jack, transmission speed in the local bus: 500
kbps / 2 Mbps, degree of protection: IP20, including Inline connector and labeling field

Product Description
The bus coupler is intended for use within a Modbus/TCP (UDP) network. The bus coupler creates the link to the Inline I/O system and the industrial
I/O signals connected to it. Up to 63 Inline devices can be connected to the bus coupler.

Your advantages
• 2 Ethernet ports (with integrated switch)
• Transmission speed of 10 Mbps and 100 Mbps
• Automatic detection of the transmission speed in the local bus (500 kbps or 2 Mbps)
• Support for three branch terminals as a remote bus branch (32 remote bus devices in total)
• Firmware can be updated
• Data exchange via OPC server supported
• Software interfaces for access via TCP/IP: Device Driver Interface (DDI) and High-Level Language Fieldbus Interface (HFI)
• Web-based management
• Security in the network: Port disconnection possible via web-based management