Description
The FS200 Series may be used to control inductive,
incandescent, or resistive loads. Factory fixed flash rate of 45
or 90 FPM or may be ordered with a fixed custom flash rate
ranging from 10 to 180 FPM. Encapsulation provides protection
against shock, vibration, and humidity. Uniform performance,
high inrush current capability, and low RFI, make this series ideal
for general industrial applications.
Operation
Upon application of input voltage, the T2 OFF time begins. At
the end of the OFF time, the T1 ON time begins and the load
energizes. At the end of T1, T2 begins and the load de-energizes.
This cycle repeats until input voltage is removed.
Reset: Removing input voltage resets the output and the
sequence to T2.

FEATURES BENEFITS
3A steady, 30A inrush,
SPST output contact
Provides direct control of inductive, incandescent, or
resistive loads
Totally solid state
and encapsulated
No moving parts to arc and wear out over time and
encapsulated to protect against shock, vibration,
and humidity
High inrush current
capability and low RFI Ideal for general industrial applications