Functional Description
74VHC4051AFT:8-Channel Analog Multiplexer/Demultiplexer
74VHC4052AFT:Dual 4-Channel Analog Multiplexer/Demultiplexer
74VHC4053AFT:Triple 2-Channel Analog Multiplexer/Demultiplexer

General
The 74VHC4051AFT, 74VHC4052AFT and 74VHC4053AFT are high-speed, low-voltage drive analog
multiplexer/demultiplexers using silicon gate CMOS technology. In 3 V and 5 V systems these can achieve highspeed
operation with the low power dissipation that is a feature of CMOS.
The 74VHC4051AFT, 74VHC4052AFT and 74VHC4053AFT offer analog/digital signal selection as well as mixed
signals. The 74VHC4051AFT has an 8-channel configuration, the 74VHC4052AFT has an 4-channel ×2
configuration, and the 74VHC4053AFT has a 2-channel ×3 configuration.
The switches for each channel are turned ON by the control pin digital signals.
All control inputs are equipped with a newly developed input protection circuit that avoids the need for a diode
on the plus side (forward side from the input to the VCC). As a result, for example, 5.5 V signals can be permitted
on the inputs even when the power supply voltage to the circuits is off. As a result of this input power protection,
the 74VHC4051AFT, 74VHC4052AFT and 74VHC4053AFT can be used in a variety of applications, including in
the system which has two power supplies, and in battery backup circuits.

Features
(1) AEC-Q100 (Rev. H) (Note 1)
(2) Wide operating temperature range: Topr = -40 to 125
(3) Low ON-resistance: RON = 45 Ω (typ.) (VCC = 3.0 V)
RON = 24 Ω (typ.) (VCC = 4.5 V)
(4) Low power dissipation: ICC = 2.0 μA (max) (Ta = 25°C)
(5) High noise immunity: VIL = 0.8 V (max) VCC =3.0 V
VIH = 2.0 V (min) VCC =3.0 V
(6) Power down protection is provided on all control inputs.