General Description
The AOZ2262BQI-18 is a high-efficiency, easy-to-use DC/
DC synchronous buck regulator that operates up to 28 V.
The device is capable of supplying 10 A of continuous output
current with an output voltage adjustable down to 0.8 V ±1%.
A proprietary constant on-time PWM control with input
feed-forward results in ultra-fast transient response while
maintaining relatively constant switching frequency over the
entire input voltage range. The on time can be externally
programmed up to 3.3 μS.
The device features multiple protection functions such as
VCC under-voltage lockout, cycle-by-cycle current limit,
output over-voltage protection, short-circuit protection, and
thermal shutdown.
The AOZ2262BQI-18 is available in a 4 mm × 4 mm
QFN-23L package and is rated over a -40°C to +85°C
ambient temperature range.

Features
• Wide input voltage range
- 10 V to 28 V
• 10 A continuous output current
• Output voltage adjustable from 0.8 V ±1.0%
• Low RDS(ON) internal NFETs
- 14 mΩ high-side
- 9 mΩ low-side
• Constant On-Time with input feed-forward
• Programmable on-time up to 3.3 μS
• Selectable PFM/PWM Mode
• Ceramic capacitor stable
• Adjustable soft start
• Ripple Reduction
• Power Good output
• Integrated bootstrap diode
• Cycle-by-cycle current limit
• Short-circuit protection
• Over voltage protection
• Thermal shutdown
• Thermally enhanced 23-pin 4 mm × 4 mm QFN

Applications
• Portable computers
• Compact desktop PCs
• Servers
• Graphics cards
• Set top boxes
• LCD TVs
• Cable modems
• Point of load dc/dc converters
• Telecom/Networking/Datacom equipment