DESCRIPTION
This document describes the specifications for the F0502
600MHz to 1000MHz dual path Sampling IF (SIF)
Receiver used in Multi-mode, Multi-carrier BaseStation
Receivers. Refer to the Part Number# Matrix below
describing the frequency coverage of the complete series.
This series is offered with high side or low side LO
injection options for all UTRA bands and offers
significantly better Noise and Distortion performance than
currently available solutions. IF frequencies from 60MHz
to 275MHz are supported.
The F0502 SIF provides 28.2dB gain and offers 47dB
gain adjustment in 1dB steps and is designed to operate
with a single 5V supply. Nominally, the device offers
+44dBm Output IP3 using 480mA of ICC. Alternately one
can configure the device in low current (LC) mode to
reduce power consumption to less than 1.95 watts.
This device is packaged in a 10x10 68-pin TQFN with
50Ω single-ended RF input and 200Ω differential IF
output impedances for ease of integration into the
receiver lineup. The 200Ω differential IF output can
easily be matched to 100Ω differential per the
application drawing.

FEATURES
• Dual Channel for Diversity / MIMO Systems
• Combines FlatNoiseTM and Zero- DistortionTM
technology
• 28.2dB Total Power Gain
• 47dB gain control range
• 1dB Gain Steps
• Ultra linear +44dBm IP3O
• Low NF: 9.6dB at GMAX
• 50Ω input impedance
• Matched 100Ω differential output impedance
• Ultra high +20.2dBm P1dBo
• Independent path standby mode
• Constant LO impedance in STBY mode
• 6 bit parallel control
• 60MHz to 275MHz IF frequency range
• Excellent 2nd Harmonic Rejection
• ICC = 480mA STD Mode, 390mA LC Mode
• 10 x 10 mm 68-pin VFQFPN package